2016 hops pellet mill /straw pelletizing machine/pellet making machine for fuel and fodder

 Features of biomass wood pellet machine / wood pellet mill

     1.Vertical feeding directly in place. centrifugual force is enough , without jam.
    2. Die static, roller rotating, materials centrifugal, Evenly distributed around. make wood pellets more smooth surface.
    3.Double-layer dies, up and down dual-use, reduce the cost, enhance the efficiency, can be dual-use, high capacity, energy saving.
    4.Ring die, vertical structure, and cooling system -fan blower good for cooling the pelletizing room.
    5.Independent and frequency conversion discharge device, to ensure that the rate of pellet formation. 98%
    6.Automatic lubrication system, lubricate the bearings without stop , make our wood pellet machine can work at least 20 hrs , work 24hrs , but we recommend operate 20hrs .
    7.Superior equipment : Siemen Beide motor , Harbin Standard bearing and guomao reducer steel ,can save you electricity consumption.
    8. New design of hoisting device , can change the die and rollers easier.

 Machine unique characters of wood pellet machine / wood pellet mill

    1. Cooling system:  we adopt fan bolwer cooling system to draw out these heat , so when the wood pellet go out , its surface is smooth wihtout water.
    2. Lubricate system: the oil pump, 20- 24 hrs working ,lubricate the bearing per half an hr automatically. 
    3. Dust collection system: bag dust collector, dusting collecting room, dedusting function, keep working environment cleaner.
    4. Thransmission system: reducer transmission, stable and enough power for pellet machine running. The reducer has 3- times reduce, from 1490r/min to 75r/min, ensure the transmission accurancy.

    5. Motors: the motor is 4 -grade motor, save electricity consumption compare with 6 --grade motor, the pressure between roller and die is enough to press the hard wood materail.

    6. High formation rate: 98.6% and the pellet density can reach EU standard , is 1.1- 1.3kg/m^3, bulk density is 650-750kg/m^3

 Technical Parameters of wood pellet machine / wood pellet mill

 Raw materials for wood pellet machine / wood pellet mill

     Wood products,  ricehusk, sunflower husk, peanut shell and fruit shell; Pine,log wood and branch,stem, rind and otherwood waste; a variety ofcrop stalks; rubber, cement, ash and  other chemical materials.

  If you're interested in our machines, pls kindly tell us the following information:

    1. What's the capacity you want?
    2. What's the raw material?
    3. What's the size of the raw material?
    4. What's the moisture content?
    5. What's the final pellet size do you want?
    6. Automatic packing or manual packing needed?
    7. What's your country voltage?

For more information about the wood pellet making production line, please feel free to contact Devina Via Skype:  or Tel: 0086 15637153018