amorphous strip cutting machine

Specifications

amorphous strip cutting machine  

Introduction:

The cutting machine can shear the nanocrystalline ribbon or amorphous ribbon into more narrow ribbon, then re-wound into a roll after shearing under a certain tension. The machine is easy to operate, and has the high quality, high utilization of materials. Besides, the speed can be adjusted by frequency control of motor speed control.

Specifications: 

1)        Strip thickness: 0.02mm ~ 0.3mm

2)        Maximum strip width: 200mm

3)        Maximum OD of raw material strip: φ500mm

4)        The ID of raw material strip: φ150mm

5)        The maximum weight of raw material strip: 450kg

6)        The minimum width of slitting strip: 2mm

7)        Hobbing cutter diameter: Φ120mm

8)        Cutter shaft diameter: φ60mm

9)        The slitting speed: 10-60m/min

10)    The slitting number: ≤12

11)    The inner diameter of winding: Φ75mm

12)    The outer diameter of winding: Φ320mm.

13)    The machine weight:1500KG

14)    The rated power:2.2kw

15)The machine size:1600x1200x1300mm  

Purpose of amorphous ribbon slitting machine:

1. This amorphous ribbon slitting machineis high quality .This amorphous ribbon slitting machine is applicable for the slitting tooling of industrial adhesive tape, electronic material, protective film, copper foil, aluminum foil, OPP, PE, PVC, sheet, cloth, etc.
2. This amorphous ribbon slitting machine is widely used in the industries such as printing, packing, electronics, leather, clothes making, plastic, etc.Easy operate with this amorphous ribbon slitting machine.This amorphous ribbon slitting machineis safety to use.