hot sell amorphous ribbon shearing machine

Specifications

amorphous ribbon shearing machine

Introduction:

The slitting machine can shear the nanocrystalline ribbon or amorphous ribbon into more narrow ribbon, then re-wound into a roll after shearing under a certain tension. The machine is easy to operate, and has the high quality, high utilization of materials. Besides, the speed can be adjusted by frequency control of motor speed control.

Specifications:

Ribbon thickness: 0.02mm~0.6mm 

Ribbon Wax. width: 220mm 

The minimum width of shearing:1mm 

The diameter of hob: Φ125mm 

The diameter of hob shaft: Φ60mm 

Shearing speed: 10M/min~60M/min

Purpose of amorphous ribbon slitting machine:

1. This amorphous ribbon slitting machineis high quality .This amorphous ribbon slitting machine is applicable for the slitting tooling of industrial adhesive tape, electronic material, protective film, copper foil, aluminum foil, OPP, PE, PVC, sheet, cloth, etc.
2. This amorphous ribbon slitting machine is widely used in the industries such as printing, packing, electronics, leather, clothes making, plastic, etc.Easy operate with this amorphous ribbon slitting machine.This amorphous ribbon slitting machineis safety to use.

After-service of amorphous ribbon slitting machine:

1. Warranty for amorphous ribbon slitting machine: 12months
2. After-service of amorphous ribbon slitting machinehine: A reply within 24 hours
3. A free training in our factory available before delivering machines

Picture:

For more info please feel free to contact with me.skype: bidragon2017