Pullets raising cage for poultry farming equipment equipment for poultry farms

The distance between frame legs is 1200mm, the cage block is made of hot dig galvanized sheet, so that pullets cage is very strong. C-Shape legs formed by hot dig galvanized sheets, it is easy to cleaning and have long life span.

The cage mesh is produced with hot dip galvanizing technology which is corrosion resistance.

The crane feeder make the uniform feeding. The hopper is with special regulating sensor which regulate the feed quantity according to broiler age.

The inside trough is made of hot dip galvanized sheet which fetted with an additional adjusting plate. When birds are small, birds gathering to eat the feed below the adjusting plate. With the age increasing, the adjusting plate goes down. And chicken eat the feed above adjusting plate. There is a bird stop line above the adjusting plate. Therefore, all the design is ensure the pullets eat freely and avoid running away.

According to the features of pullets, there is a galvanized blocking sheet between each cages. That is not only keep warm but also increase air volume. There are 4 hot water pipes are under the cage bottom, thus realizing constant heating. Also the galvanized block sheet also keep warm for chicken. Experience have prove that the survival rate of pullets raising in this type of cage is higher and chicken is more uniform.

Each cage is divided by a partition net into two cell cage, Each cell cage is fitted with a water pipe and three nipple drinkers. The height can be adjusted freely according to the age of broiler.