China supplier Scale inhibitor

Specifications

Siliphos ( Scale inhibitor )

General Description

Siliphos is a kind of slow-release chemical agent, it is made from a variety of phosphate and silicate through special technology. The principal constituent of Siliphos are polyphosphates and polysilicates. They can react with metal cation (Ca, Mg, Fe, Zn) in the water to create the soluble complex. So it can be used for anti-scale and anti-rust.

Application

Used as antiscale, antirust, anticorrosion, antivirus and algae removal for industrial & drinking water.

Main material

P₂O₅, Na₂O, CaO

Purity of active ingredient: ≥89%  

PH: 7+/-0.5

   Density: 1.15+- 0.05
   PH (5%): 2.5 +- 0.5
   Freezing Point: -15C
   Minimum storage temperature: -12C

    Viscosity: 1.79cp (25 C)

instructions

    Hyperspere PNT 220 is high-performance liquid scale inhibitor / dispersant used to control the membrane separation system to control calcium carbonate, sulfate and iron oxide precipitation caused by fouling. After extended use of this inhibitor system cleaning cycle, the membrane life expectancy and reduce costs. Hypersperse PNT 220 reverse osmosis and nanofiltration has been widely used devices.

problem statement
    Water's high salt and iron compounds produced by inorganic precipitation is caused by membrane separation system in the scaling major cause of pollution, this phenomenon must be controlled to prevent the generation of reverse osmosis membranes deposited on the surface and to avoid increasing the pressure difference caused by the anti- permeable membrane surface damage.

strong protection to avoid deposition
Hypersperse PNT 220 applied to different sources of water, Argo Scientific Hypersperse product combines organic phosphate (phosphonate) and the dispersion of polymer to prevent the hardness and iron oxide deposits.

processing and add requirements
Dosing point: In order to achieve maximum performance Hypersperse PNT 220 best filter in the mixer before adding or security.
Please ask your local Argo Scientific sales representative for your specific system conditions to determine the dosing point and dosage, and in some systems, the specific dosing point and injection equipment is a must.

dosage
The required dosage needed to determine the operating conditions of individual devices, according to water salinity, temperature, recovery, reverse osmosis and other types of conditions and calculate an appropriate dosage.

dilution
Hypersperse PNT 220 can be added directly or diluted use. Dilution to use RO water or demineralized water, at room temperature, dilution does not exceed 10.

Packing
 Product packaging is 25KG / plastic barrel and 220KG / plastic drum