TC Sawdust Rotary drum Dryer equipment

Specifications

Taichang CE Certificate Flat Die Biomass Wood Pellet  Machine(0086-18888342566)

Main raw  materials of Rotary dryer:

Slag, coal powder, mining powder, clay, sand, limestone and so on. It is made into rotary body, lifting blade, driving device, supporting device etc. 

 Main Features of Drum dryer:

1.Innovative design: with new-style vertical of drying,the material is free dropping gas material countercurrent operation,which is integrated gathering heat conduction and thermal radiation into a body .Heat efficiency is up to 93%. The whole process is automatic control, easy operation and maintenance.
2.Less investment: application of small area can save 80% of the investment, and it is especially suitable for the old-line transformation. It can make use of abandoned or idle kiln, mill, tower, library and horizontal dryer, etc. further reducing the investment.
3.Widely used.
4.Long life: the internal components is used in all heat-resistant alloy, long life, low failure rate.

Advantages of Rotary dryer:

1.Three drum dryer use telescope-feed structure, dry the material quickly.

2.Simple design, self-insulation, improve the heat efficiency to exceed 80%.

3.Structure delicate, stable operation.

4.gooddryingperformance, coal consumption <8kg when drying 1 ton material.

5.The fuel can be coal, oil, natural gas etc, dry mass, granule and powder material.

6.Reduce land area for 50% compared to single drum rotary dryer, so construction investment is saved 50%power consumption saved 60%.

7.Finished product moisture can be adjusted depends on requirement of client.

8.Lower outlet tempreture, loonger dust removal using life.

9.Drive by tug not gear.

10.Finished product tempreture lower than 60°C, packing can be done continuously.

Technical data of TCGHG Rotary drum dryer euipment:

Operating Instructions of Ring Die Pellet Machine:

1 Any repair work must be done after stopping the dryer and put a notice: “DO NOT START” on the motor.

2 Do not touch bearings and reducer with hands or other things when it is running; Do not remove the safety protection when we check, do any repair work or wash something inside the cover of big gear.

3 Round rotary parts, Do not brush with dishcloth which is tied to hands or fingers; Do not enlace dishcloth on rotary parts, especially not on support wheel.

4 Work clothes should be binded tightly to avoid the accident because gusset or other part of clothes is being wringed by rotary part of Dryer.

5 Do not put the tools for maintenance and small pieces on rotary parts, especially on support wheel.

6 Do check strictly before starting the Dryer to make sure nobody is in the body of dryer; Start to run the machine after alarm signal is sent out.

7. Stop and check.

Working principles of rotary drum dryer equipment : 

1. Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator.

2. Materials enter the barrel installed with slope to horizontal line from the higher side, and hot air enters the barrel from the lower side, and then materials and hot air mix together.

3. Materials go to the lower side by gravity when the barrel is rotating.

4. Lifters on the inner side of barrel lift materials up and down in order to make materials and hot air mix completely, which is designed to improve the producing efficiency of rotary dryer.

Sandy Bai (Sales Rep)
Jinan Taichang Transmission Machinery Co.,Ltd
ADD: Xusheng Industrial Park, Zhangqiu, Jinan, Shandong Province, China
Mobile: +86-18888342566  
MSN: jntaichang001 at  

Skype: sandytc001
Web:

 IN ORDER TO provide you the suitable product,please tell me the answers of the following question:

1.what's raw materials?

2.the moisture and size of raw materials?

3.how much production capacity you need? ( h OR d)

4.The shape and size of the final product you prefer?

5.are you product fuel or feed use it?