High Quality Leaf Vacuum Equipment TOPT-10D Lab Multi-pipe Top-press Vacuum Freeze Dryer From Toption

Specifications
freeze dryer
benchtop machine
condenser temp.-60 or -80 centigrade
with stopper device and manifold ports
Big LCD display, drying curve could be shown and stored 

TOPT-10C Multi-pipe Vacuum Freeze Dryer/ manifold freeze-drier

full range for choose

TOPT-10D Multi-pipe Top-press Vacuum Freeze Dryer

Brief introduction of Freeze Dryer:

TOPT Series Freezing dryer is a new desktop Freezing dryer device, suit for freeze-drying experiment in laboratory and a small amount production.

The series include: common type, capping type, branch manifold common type, branch manifold capping type.

Description of Vacuum Freeze Dryer:

TOPT-10B Freezing dryer is a new desktop Freezing dryer device, suit for freeze-dring experiment in laboratory and a small amount production.

The series include:

common type, capping type, branch manifold common type, branch manifold capping type.

Major Characteristics of TOPT-10D Multi-pipe Top-press Vacuum Freeze Dryer:

1. Imported compressor, high capability of water-capture, low noise; 
2. Match the green environmental protection of international standard; 
3.Big openings of the cold trap, without coil pipe inside, have pre-freeze function; 
4.Liquid crystal display, Chinese (English) interface, display drying curve; 
5. Small volume, convenient operation; 
6. Transparent bell-cap drying room is safe and visual; 
7.The pre-cooling shelf can be used as draft tube, so it can accelerate the speed of drying; 
8.International standard vacuum pump interface may connect varied vacuum pump;
9. Cold trap and operation panel are all stainless steel, corrosion-resistant and bright; 
10.Communication interface is optional;
11.Valve with nitrogen is optional;
12.Dual-machine cascade refrigeration is optional.The technology is mature.The temperature is low(apply -80℃ device) .  

Technical indices of TOPT-10D Multi-pipe Top-press Vacuum Freeze Dryer:

1. cold trap temperature: <-55℃,-80℃(is optional)

2. vacuum degree: <10Pa

3. freeze-drying area: 0.08m2

4. water-capture capability: 3-4Kg/24h

5. material: 0.8L

6. material tray: Diameter180mm, 3layers

Diameter12mm xilin bottle: 560

Diameter16mm xilin bottle: 285

Diameter22mm xilin bottle: 165

7. power:970W

8. dimension: 565*420*(360+430)(mm)

Time of freeze-drying for Vacuum Freeze Dryer:

when the depth of material under 10mm, the time of drying in general is about 24h 

Toption Freeze Dryer Advantages: 

1. Drying curve can be dispalyed, convient for you to observe lyophilization proess. 

2. Big LCD touch screen display, most products in China are not LCD at the moment. 

3. Operation panel and manual can be produced in English for you. 

4. Voltage can be changed base on your needs 

5. Danvers compressor with high quality and low consumption. 

6. 8 years production experience for strong technique support  

Application of vacuum Freeze Dryer:

2. How do you think about the Freeze Dryer Market?