Manufacture supply 1000 kg per hour wood sawdust pellet machine, pellet line for wood sawdust

                  1000 kg per hour wood sawdust pellet machine

If you are intersted in our machines, pls contact: 

Alice:+008618353139932  ( whatsapp), skype: alice chusongtao  Email: alice @  

Difference between 1000 kg per hour wood sawdust pellet machine

A:

1, vertical feeding, directly in place.

2, mold static, pressure wheel rotation, material centrifugal, evenly around.

3, mold two, up and down dual-use, cost reduction efficiency; can also be dual-use, high yield and energy saving.

4, ring mold, vertical structure, conducive to the cooling chamber cooling.

5, a separate discharge device to ensure that the particle forming rate.

6, an independent lubrication system, can be achieved without automatic lubrication.

B, the three major differences of vertical ring die pellet machine:

1, the mold up, vertical feeding, directly in place, conducive to heat: the general ring mold granulator side of the feed side, the proportion of light material is difficult to enter the granulation chamber, the need for special equipment forced to advance, but still lead to Material is not uniform; the most important is the use of such a feed design is not conducive to the cooling room cooling, and thus restricted the transmission system (gears, bearings) life. Flat granulator has two kinds of structure, although the vertical feeding, but there are many difficult to lift the drawbacks:

(1) mold plate rotation, rubbing the pressure roller structure of the flat granulator, the material easy to arch, resulting in uneven feed, affecting production;

(2) die plate static, pressure wheel rotation, such a flat granulator can not afford arch, but produced a centrifugal force, the materials into the material room to the surrounding, so that the granule hole up and the hole distribution Of the flat die center without material suppression, resulting in material accumulation, uneven thickness.

2, mold static, pressure wheel rotation, material centrifugal, uniform cloth around: with two high-level mold bounce effect, so that the natural feed evenly distributed in the ring mold on the inner surface. The general ring mold granulator is pressure wheel static, mold rotation, no centrifugal force at all, the material distribution is not uniform. Although the die-casting machine produces a centrifugal force, the die hole does not coincide with the direction of the generated centrifugal force.

3, double-layer mold, multi-function, high efficiency: mold has two parts up and down, you can choose two different specifications of the aperture, to produce two different specifications of the finished particles. When the adhesive material is good, can be used to add high pressure roller and two molds, the output reached four times the effect. Any mold, ring mold is impossible.

2.Our wood pellet machine has some accesorries such as bag dust collector, independent lubrication system,fan blower  etc. 

Wood pellet machine description:

Wood pellet machine (vertical ring-die type pellet machine) was desinged and developed by us, which is the first domestic stereotypes pellet mill. Pellet machine absorbs the essence of the pellet machine at home and abroad, heart part is double layer ring die. Wear -resistant roller is made from high alloy steel materials , with long service life up to 2000 hours. 

This pellet mill is with the unique design, reasonable structure, low consumption and high efficiency, strong wear resistant. It filled the blank of pellet mill vertically feeding way. 

This pellet mill is suitable for pessing hard raw materials such as: wood waste, sawdust, sunflower seed shell, peanut shell and other fruit shell, branches, trunks, bark and other wood shavings. A variety of crop stalks , cement , ash and other chemical raw materials. 

1 Can we visit your factory?

-Yes, you are warmly welcome to visit us at any time.

2 Where are you?

- We based on zhang qiu Jinan city, shan dong province china. Jinan is a very beautiful place which is famous for spring.

3If i come to your city, how can i go there?

-You can fly to jinan air port directly, we can pick you up in the air port.

4 We are from europe and we need ce certificate for your machines, can you offer this?

-Yes, we have export so many machines to europe, so our machine got ce certificate already.

5 How long is your guarantee time for your machines?

-Our guarantee time is one year except easy wear spare parts .

6 How long is your spare parts life span?

- Roller and die life span are almost same. Two kind for your choose: one is 800-1000 hours, another is 2000 hours. Reason for difference is because of raw material different.

7 What brand is your motor and your skf, reducer?

- our machine motor is huali brand, the most best brand in china.,Bearings are skf imported from japan. Rducer is the best brand in china too, boneng reducer.