Low consumption pellet cooling machine, wood cooler, feed cooler with ce

2). Low power consumption, easily operation;

1. Large cooling room and cooling capacity from 5-30t/h.

2. Countercurrent cooling principle, reasonable design and good cooling effect.

3. Cold air enters from the bottom ensures high cold air efficiency.

4. Unique rotating structure to distribute pellets evenly and cool them completely.

5. Suitable to cool bulk, platy or particles materials, especially to puffing materials and other large volume material.

1. The Combined Cooler and Sieve only can start under the situation without any loading. In another word, the operator must guarantee without any material. Only after the Combined Cooler and Sieve start for a while, the material can be feeding.

2. When feeding material into Combined Cooler and Sieve, the speed must be slow till to the rated capacity gradually, the feeding must be evenly. Otherwise the material will be clogged and damage the machine.

3. In order to guarantee the starting of Combined Cooler and Sieve without any loading, before the Combined Cooler and Sieve stops work, all the material inside the Combined Cooler and Sieve must be discharged completely without any resting.

4. Please prohibit any big material inletting the Combined Cooler and Sieve mixing with the small material. For the big material will be clogged and damage the machine.

5. Please check each part of Combined Cooler and Sieve before starting the machine, especially whether the fixing parts are loosing. All the fixing parts must be fastened well.

6. Please pay more attention on the screw between the Combined Cooler and Sieve and Connecting Shaft, once checking it is loosen, stop the machine urgently and fasten it.

7. Don’t take off the cover of Combined Cooler and Sieve avoiding hurting the operators.

8. When the Combined Cooler and Sieve has any problem, please check and solve it, surely don’t run the machine under the abnormal situation.

9. Please lubricate the Combined Cooler and Sieve often. The reducer must be lubricated according to the operation manual. The front and back bearing boxes of Combined Cooler and Sieve must be lubricated by lithium grease with adding about 5g each 15 days.

1. We provide 1 year guarantee.

2. We provide English manual and video for installation & operation.

3. If required, we could send technicians for installation and commissioning, training.

4. We provide feed formula and free spare parts.

bring this PI to the bank, and ask to make T/T for the payment. For single set, your machine can be ready within 30-45 days after we getting the payment, we will send to the port and deliver to you by sea.

One year

5. How does your factory do quality control?

Our factory has gained CE certificate and ISO certificate. " Quality is priority" we always pay great attention on quality controling from the begining to the end.