High-tech energy saving calcination rotary kiln

Specifications

High-tech energy saving calcination rotary kiln

Introduction

1. Rotary kiln have the highest quality, with the widest range of stone feed size. 

2. Rotary kiln can use gas, oil or coal for firing. We designs for single line plants up to 1,800 tpd.

Application 

Rotary kiln is a pyroprocessing device used to raise materials to a high temperature (calcination) in a continuous process. Materials produced using rotary kilns include:

*Cement, *Lime, *Refractories, *Metakaolin, *Titanium dioxide, *Alumina, *Vermiculite, *Iron ore pellets, *Zinc ore pellets.

Workingb Principle 

Modern plants are composed of 3 key components to acheive high effiency: Cooler, Kiln, and Preheater.

The basic components of a calcination rotary kiln are the shell, the refractory lining, support tyres and rollers, drive gear and internal heat exchangers.

The calcination rotary kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The material to be processed is fed into the upper end of the cylinder. As the kiln rotates, material gradually moves down towards the lower end, and may undergo a certain amount of stirring and mixing. Hot gases pass along the kiln, sometimes in the same direction as the process material (co-current), but usually in the opposite direction (counter-current). The hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln. Such a flame is projected from a burner-pipe (or "firing pipe") which acts like a large bunsen burner. The fuel for this may be gas, oil or pulverized coal.

Features and Advantages 

1. High capacity:150-1000t/d

2. Low heat consumption 20%

3. Excellent clinker quality and stable operation

4. Lower SOx and NOx emissions.

5. Operates on a variety of fuels.

6. Control system for entire facility

7. Wide range of stone feed sizes.

Technical parameters 

( Part technical parameters of rotary kiln for your reference)

Company Profile

Henan Fote Heavy Machinery Co., Ltd covers an area of 100,000 square meters which 

includes 60,000 square meters of heavy duty workshops. We have more than 200 sets 

of large and medium sized metal processing equipments. The Maximum lifting capacity 

is 300 tons. 

Our service

1)  Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.

2)  Medium-sales service: Accompany you to complete the acceptance of the equipment,draft the construction scheme and detailed process, and complete process of export.

3)  After-sales service: We sent engineer to the scene to guide installation, debugging and training operators.