Ring-die Wood Pellet Machine

Festures of wood pellet mill                                                                         

1. Wide suitability: All kinds of biomass raw material can be used in this machine. Widely material :The rice husk, palm fiber, corn stalks, cotton stalks, wheat straw rice straw, peanut shell, corn cob, branches, leaves, sawdust and other crops in rural areas , solid waste, furfural-residue, edible fungus dregs, and Chinese herbal medicine residue etc.

2. full automation :

   it has the automatic lubricating device that can add oil for the bearing and roller every 2 hours, so the machine can keep on working all the day without stopping.

3. The ring die (mold): stainless steel, double layers, both sides of the ring die can be used, thus the life time of the molds can be reach up to produce 1500 ton pellets.

4. Less labor: two people is enough to operation the machine

5. Wearing parts: the wearing parts of the machine are the gear of the roller, molds, only these two parts, they are  in stock.

Finished product:

Ring-die wood pellet machine wear parts:

Biomass wood pellet machine Technical parameters

Questions and Answers about wood pellet mill    

         wood pellet production line         

 1. What is the type of your pellet machine ?

    Our pellet machines are ring die pellet machines, high-tech, full automatic, during the production process, the pellets will press out by the roller from the mold horizontally not vertically, so it is the roller running around the mold, thus it will save a lot of pressure, so the mold and roller can be used for longer time, and capacity will be higher than the vertical-mold pellet machine under the same power condition.

2. What is the largest capacity of your machine?

    For single pellet machine, the largest capacity is MXKJ-9S-3, 90KW, 1-1.5 ton per hour. We have a pellet machine unit — 3 sets of pellet machine as one unit which is feeding by sub-feed conveyor automatically. That is about 1.5*3=4.5t/h, so the capacity could be as large as you want.

3. What are the wear parts  of your machines and their working service?

   The wears parts of our pellet machine are mold and gear of roller , generally speaking, the mold can be used to making 1500 ton pellets, for example , produce 15 ton per day, then can be used for about 100 days. So for one year production, need to buy another 2 sets, and gear can be used for about 1 month, need another 11 sets for one year.

4. What are the requirements of the raw materials?

1). Moisture content: less than 15%

2). Length: less than 8mm.

5. What kind of machines does the whole pellet line include?

1) Moisture content: if higher than 15%, by dryer or drying by the sun.

2) Length: if larger than 8mm, should use crusher.

3) Cooler: after pelletizing, if you want to pack the pellets directly, should use cooler, otherwise put the pellets aside and cooling by nature.

4) Packing machine: after cooling, could pack by manual or by packing machine.

We have all the associated equipments, please contact me if needed.

6. Is your company manufactures or trading company?

   We manufactures with mature production line, we could offer the best suggestions and recommend the most suitable machines and offer the best and in-time after sale service.

7. Could you send your technicians to our place for installation and train our people?

  Yes, we’d like to send technicians to your place for installation as your requirement and your part shall bear the associated fees.

8. What is the after-sale service of your machines?

   Two years quality guarantee, during this period, any parts (except the wear parts: Roller, molds, bearings, oil seals) of our machine doesn’t work, after we have talked or sending new parts for free to your place, but still can not fix, we could send our technicians to your place.

After one year later, we will definitely support your when needed, you will be welcome to contact us for any problems during production.

 wood pellet machine shipping photos

Our customers' working site

Our Services

Pre-sale

1. Depending on customer's requirement, we insist on "making profit at lowest investment" and gives best solution as per the customer’s special demand.
2. Design the most reasonable project and maximum customers' profit. 
3.Provide engineers to scene to plan work site if the customer needed.
4. Provide equipment list, design drawing, construction drawing, equipment install drawing.

During-sale

1. Depend on scene, draw design drawing , construction drawing, equipment install drawing, civil work detailed drawing for references, operating manuals, maintenance video, etc

2.Manufacturing products strictly on contract while customer constructing.

3. Production progress report each week with detailed description and photos, including raw materials tables, process and deep process record, testing data sheet, etc.
4. Testing all the equipments by witness of the customer ex-work, delivery, customer acceptance.

After-sale

1. Provide engineer to work site guiding install, debugging and commissioning. 
2. Test equipment after installation, training operators for free, remind notice in operating. 
3. Regularly returning visit to the customers.

4. Within warranted period, we take charge of everything if any quality problems. After the warranted period, we still focus on the plant running and services.

5. Response customer’s questions within 1 working day, give effective solutions within 3 working days, go into action with 5 working day.

That’s our promise, as we know quality and service both are important for long-term’s development and cooperation. 

Contact Information

          Zhengzhou Yufeng Heavy Machinery CO.,LTD
    Tel: +86 371 60395600
    Fax:+86 371 67681159
    Website:
    Address: West Section of Gongye Road,Shangjie Industry Area,Zhengzhou,Henan,China