[Newest design] High Efficiency coal briquetting plant It can process any shapes Supply all over the world

High Efficiency /Shisha/Tablet Press/Coal Press Machine Long Time Exported To Arab                                                                             

                                                                            coal briquetting plant                                                                  

Main Technical Parameters of coal briquetting plant : 

introduction of coal briquetting plant:

Our coal briquetting plant can press many different kinds of tablets by changing moulds.The shapes may be ( Φ10-Φ50mm )diamonds, cuboid, ringlike, rhomboid, triangular form, cylinder, scrotiform, pyramid, convexity, concavity, etc. It also can press tablet with words, brand, pattern, double layers with two color, tri-layer with three color and so on. The machine can press20-24 times per minute, 9-12 tablets per time, 300000tablets per hour. The machine's surface is smooth, both the pressure and density can be adjusted. Its characteristics are stable stamping, high-yield, good performance. It is the best choice for customers.   

Production Line of coal briquetting plant

coal briquetting plant Raw material:

This series of coal briquetting plant are suitable for all kinds of dry and wet powder or granular materials,such as water pipe carbon, crystal carbon, carbon powder, coal powder, coking coal, cigarette ball, plastic tents fumicants, solid wax, solid alcohol, solid fuel, carbamide, fertilizer, forage, Chinese dregs of a decoction, west medicinal powder, ammonium chloride, dregs of furfural, rare earth, bauxite, scale cinder, lime powder, ash, high test hypochlorite, iron flavor powder.

coal briquetting plant Main features:
1. Shisha coal briquette ball press machine is applied to suppress tablets with large volume.
2. Special design is suitable for light powder materials.
3. Humanization design with easy clearance and maintenance.
4. Transmission system in main gear box below airtight is completely separated, reducing noise and wear.

We can do any shape of Shisha

So, This is a area of coal briquette ball press machine .We can manufacture any kinds of shapes.Please tell you for your requirements.I'm very willing to answer your all questions.There is photos of coal press machine.As follows:

Charcoal machine of coal briquette ball press machine (used for made BBQ charcoal)

Final product

Ball press machine of coal briquetting plant:

Final product of coal briquetting plant

Cahrcoal briquette machine of coal briquetting plant

Final product

Anyway,We can manufacture any kinds of machine for charcoal.We has have 25 years production experience,Good quality and after-sales service.Welcome you can visit our factory when your free.

Production process of coal briquetting plant

coal briquetting plant Tongli coal briquette ball press machine belong to environmental protection machinery,High production and low loss,The machine is our factory main products,We has have 25 years production experience,We are modern factory of design,manufacturing ,sales,export in the whole .

In recent years ,Tongli coal briquette ball press machine exported to Russia,Mongolia,South Africa,southeast Asia,And other countries and regions. as well as sold to many provinces and cities in china.

  coal briquette ball press machine is not the only a set of machine,It’s include: CrusherDryerBriquetting machine and carbonization furnace.That is to say,It is a production line.

   The requirements of raw materials:

   1.If the size of materials greater than 6mm,First of all.You have to crush it.It’s help to next processing,This is squeeze to bar shape.So,you need a Crusher.

   2. The materials of crushed later.If the moisture bigger than 12%.At now, You need a Dryer,It’s a part of the Charcoal briquette machine   production line,Used for drying to about 6%-12%(moisture).

   3.Molding! After drying materials,We will take the materials processing to bar. It is a very important procedure.Briquetting machine use for it.

   4.Carbonization . This is a last procedure.Take the wood bar shipshape into the inside of carbonization furnace.About spend 8-10hours. The high quality charcoal is ok !

     Afterwards , You need take the finished product move to other place.After cooling,The high quality environmental protection charcoal is completed.

Paking of coal briquette ball press machine

If you are interested in Or would like learn more information of our machine,Please contact us now,We are looking forward to cooperation with you.