Widely used small sawdust dryer for long using time

Specifications

Widely used small sawdust dryer 

Introductions for steam sawdust dryer

It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy to operation and maintain, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.

All of round places can be adjusted to any angle of 360 centigrade degree according to operation request. Clients can change the angle of dryer base on the production field.

Features for sawdust dryer

1. It dryes the materials through the hot air of 260 °c - 360 °c.

2. It can reduce moisture from 40-45% to 8-12%.

3. It is especially suitable for drying heat sensitive materialssuch as sawdust, rice hull, milled wheat straw, milled cotton, corn stalks, etc. Moreover, it can also be used to dry grains

 4. It has the advantages of low cost and high efficiency.

 5. Fuels for the furnace: wood waste, coal,waste oil etc.

Raw materials

For raw materials with heavy humidity which is above 12%, you need to install a Dryer before further processing. Regarding HGJII,it is suitable to process materials which moisture content between 35%-50%.It can reduce the humidity to 8%-12% one drying time. That means it can reduce approx.30% for one drying time. But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel.

Working principle for small sawdust dryer

Under the force of draught fan the hot air and raw materials will be absorbed in the tube. The hydrous raw materials hang over the high-speed hot-air flow will go through the drying tube. By the forces of Pulsed Tube, the air flow wills keep spinning with the rolling of the raw materials thus enlarge the heat exchanges of the hot-air flow and improved the efficiency. The hydrous materials can be dried in about 3-5 seconds, and be collected by the Cyclone Separator. The recovery rate can be reach up to 98% and the equipment can be keep working for a full day time.

Technical Parameters for small sawdust dryer

Big capacity sawdust dryer

Service

1. Before Sale: help you to set a purchase plan according to your requirement

2. During Sale: accompany you to check the performance of the machine; train technical  stuff for you

3. After Sale: Sent artisan to your place and help you with the installation

About us

We can equip the line according to your practical situation. If you have plan to visit China, warm welcome to visit our factory! We have plenty of video and pictures as your reference.