Professional Bio photon oxygen jet machine for skin rejuvenation

135W

Water oxygen jet

100KPA

Ambient temperature

5°C~+40°C

Frequency 

2.2khz ( deep skin)

4.5Khz  (middle layer)

Display

Touch Screen

Host

1 piece

1 piece

1 piece

10 set(40 pcs)

1 piece

BIO-Photon Electricity Work Head

1 piece

Body materials

PVC plastic and Metal

salon art beauty Packing size

47.5*64.4*55cm  Outer Carton box(WITH FOAM INSIDE)

salon art beauty N.W./G.W

20/22 KG

Voltage

AC 100V-120V/200V-240V/50Hz/60Hz

Oxygen injection (Do with the nozzle)

To choose the suitable essence according to the different skin. The jet can whiten and moisten the dry skin or thin the pore and control the grease of the greasy skin.

Notice: turn the pressure to 2LPM when doing the oxygen injection. The time for the whole face to inject the oxygen is 30 minutes. And do it from the forehead to the chin. For the skin in the eyelid is much thin, try one’s best to avoid this place when doing the operation.

O2 sprayer(20 minutes for every part)
Supply skin with nutrition and water instantly, make skin smooth,lighten splash,improve yellow dark skin,make skin florid,white,tighten,transparent, accompany with special spa essence oil will be better.
1.Pour 2~3 drops of spa  essential oil diluted with pure water into the small cup of the sprayer,the  
 water should be about 2 / 3 glasses,and then fasten the lid.the small cup of the sprayer can only accept liquid, other kinds of product will make a jam.
2. set work time, about 20 minutes, and then click Start button, beauticians holds the sprayer with one hand,and touch the control button to release O2,to pull backwards to spray water.
3.to pray O2,should be from the forehead to the neck,do not spray into eyes or nose,during spraying,the beautician can do calming,lifting,wrinkle easing treatment using one hand, to help the supportive nutrition penetrate, to strengthen skin elasticity, the rate should depend on  skin absorption of the guests.

BIO micro electricity function(20 minutes for every part)
1.apply enough wrinkle remove gel or essence.
2.set work time,select work mode,press start to operate.
3.the beautician hold BIO work head on parts need cared,then regulate electricity current output,it 
 should be from weak gradually to strong,which the customer can accept. Do not use on wounds or 
imflammation parts,do not stay on any part for too long time,it should be within 8 seconds.

LED function
1.apply essence on skin evenly.
2.set work time.
3.the beautician holds the soft photon work head to irradiate on skin for about 5 minutes.(RB——purple light,R—red light,B——blue light)
4.beautician holds the soft photon from neck→face→out canthus→forhead,to lift from down-up.
5.keep the customer to close their eyes,do not look straight to the light.
6.keep wet of skin when do lifting treatment using soft photon work head.
7.it can make effect only when the soft photon work head touch skin directly.
8.do not use on up eye lid or eyes.
9.the treatment time should be more than 10 minutes

Removing Acne: Acne and improve inflammation, pimples, blackheads, acne and India, to improve oily skin.

Rejuvenation: improve pigmentation, shrink pores, skin dark, sub yellow, black, deep cleansing, toning, enhance skin elasticity and luster; improve skin throughout the body, relieve skin fatigue all aspects, in addition to black eyes, bags under the eyes.   Wrinkle removal: lips wrinkles, eye wrinkles; improve frown lines and so on.

Rejuvenation: improve pigmentation, color Shen, shrink pores, skin dark, sub yellow, black, deep cleansing, toning, enhance skin elasticity and luster; improve skin throughout the body, relieve skin fatigue all aspects, in addition to black eyes, bags under the eyes.

In addition to wrinkle: lips wrinkles, eye wrinkles; improve frown lines and so on.