YL-DR04 derma roller with 200 stainless steel needles derma roller

 YL-DR04 derma roller with 200 stainless steel needles derma roller 

Working theory 

Product Show 

  Parameters of derma roller                                                        

  Usage                                                                                                                      

1.Clean your face in common way.
2.disinfection of micro-needles with alcohol.
3.After about 15minutes, put micro-needles end on your face and make it roll on your face.
4.Do not force the roller into the skin but simply use mild pressure.
5.clean the derma roller after use,store in dry & clean palce.
6.it can be used for a longer time,if you keep it well.

Notice:                                                                                                                    

1.DO NOT TOUCH BY CHILDREN
2.REMEMBER to disinfect before use
3.DO NOT use,if you have below cases:
Purulent inflammation of the skin or acne skin; 
Severe atopic dermatitis ;
Diabetes and severe hypertension

How to clean a derma roller?                                                                          
 0.2mm or 0.25mm derma roller:
After each use, soak the derma roller for ten minutes in a mixture of warm water and dishwashing liquid, air-dry.
0.5mm and above:
Wash the derma roller in warm water and dishwashing liquid, taking great care not ti bend the needles. Then soak it in disinfecting alcohol for 20 minutes. Discard the alcohol, air-dry.

Put back into container. Keep the container clean with hot water but do not use any cloth or sponge to clean it since those are full of bacteria.

How often to use roll the skin?                                                                    

Rules of thumb:
1. 0.2mm or 0.25mm roller can be used every second day.
2. 0.5mm roller can be used once a week. 
3. 1.0mm roller can be used once per three weeks.
4. 1.5mm and above roller should not be used more often than once every 5 weeks.

Treatment result                                                                                          

 

Order Process                                                                                               

Shipment and Payment