Scar Removal Skin Care Fractional Laser Skin Regeneration Wrinkle Vertical Removal Laser CO2 Equipment FC 01 8.0 Inch 590-1200nm

1) Wavelength

10.6μm

2) Output Power

Principle of RF CO2 Fractional Laser

CO2 Fractional Laser System fires a laser beam which is split into numbers of microscopic beams, producing tiny dot or fractional treatment zones within the selected target area only. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal much faster than if the whole area was treated. During the skin self-resurfacing, a great amount of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger. 

1~30W adjustable

3)Micro Pulse Energy

5mj-100mj, 16 steps adjustable

4)Estimated Power

125mj-1kj

5)Scanner Focus

F=50mm(generation 2) or f=100mm(generation 1)

6)Focus Spot Diameter

≤

7)Indication beam

2000μm(generation 2) 600μm(generation 1)

8)No.charging cycles

green semiconductor laser (532nm, 5mW)

The RF equipment has the cooling system of surface layer, and uses proprietary technology

to deliver radiofrequency energy to the deep layers of the skin and its underlying tissue. The

heat will accelerate the blood circle, lets the fibre structure shrink instantaneously, and

stimulates the renewal of collagen. In response, the collagen shrinks and remodels over time,

providing you with tighter skin, renewed facial contours.

9)System control

microcomputer control

10)Smoke Exhausting System

Built-in air blow

11)Cooling System

Built-in circulating water cooling

12)Display Screen

Color LCD (8 inch Touch Screen)

13)Transmission System

7-Articulation Joint Spring-Balanced Light Guiding Arm

14)Working Model

With scanner (galvanometer scanning)

15)Scanning area

0.1×0.1mm-15×15mm(generation 2)

0.1×0.1mm-20×20mm(generation 1) scanning

16)Graphic

Rectangular, Ellipse (standard)

17)Scanning velocity

0.1 to 9 cm2/s adjustable

18)CW: output power

1-30w adjustable

19)Pulse

0-999ms, 1ms adjustable

20)Ultra: Frequency

1hz- 000hz,

20)Treatment control

Main Technical Parameters:    

Laser wavelength: 10.6μm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Fuctions and treatment effect of elight ipl rf 

1.Permanent hair removal.

2.Smooth wrinkles, face-lifting
3.Deep flecks, epidermis flecks or pigment treating the telangiectasis
4.Promote collagen to grow, strengthen flexibility of skin
5.Acne treatment
6.Shrink the thick pore
7.For endogenous pigment: nevus of Ota, coffee spot, age pigment, freckle etc removal
8.For exogenous pigment: tattoo, eyeliner and eyebrow removal
9.Skin whitening
10.Striae gravidarum removal

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  

footswitch

21)Environmental temperature

5-40oC

22)Relative Humidity

≤

23)G.W

65kg

24)Machine Dimensio

45cm× 50cm ×130cm

25)Power Supply

AC 220V±22V; 50hz, 3Amp