Wrinkle Removal Portable Medical Laser CO2 Fractional Wrinkle Removal Beauty Care Salon Equipment FC 01 0.1-2.6mm

1) Wavelength

10.6μm

2) Output Power

1~30W adjustable

3)Micro Pulse Energy

5mj-100mj, 16 steps adjustable

4)Estimated Power

125mj-1kj

5)Scanner Focus

F=50mm(generation 2) or f=100mm(generation 1)

6)Focus Spot Diameter

≤

Main Technical Parameters:    

Laser wavelength: 10.6μm                                                            

Laser unit:TEM00 module Co2 unit (best quality for the facula)                    

Output power: super pulse output 0.3-7W, peak value 450W,continuous output 0.3-25W

Laser output mode: continuous, single pulse, repeat pulse, super pulse, with the optional pixel laser handpiece for Pixel laser output mode

Conducting system: seven joints longer articulated arm(the most advanced conducting light system in the world and the only one in China). It could be operated in the scope of R=1.7m, which makes the operation more flexible    

Handpiece:multiple function handpiece and two kinds of focus lens for f=100mm and f=50mm. With the optional adapter, it could be used for orthopedic, gynaecology and ENT surgery 

Operation mode:controlled by a touch screen and with the engineer interface and the doctor interface  

Min. spot diameter:≤0.1mm, variable spot adjusting handpiece:0.1-2.5mm          

Pulse width: the minimum pulse width is 0.1ms  

7)Indication beam

2000μm(generation 2) 600μm(generation 1)

8)No.charging cycles

green semiconductor laser (532nm, 5mW)

9)System control

microcomputer control

10)Smoke Exhausting System

Built-in air blow

11)Cooling System

Built-in circulating water cooling

12)Display Screen

Color LCD (8 inch Touch Screen)

13)Transmission System

7-Articulation Joint Spring-Balanced Light Guiding Arm

14)Working Model

With scanner (galvanometer scanning)

15)Scanning area

0.1×0.1mm-15×15mm(generation 2)

0.1×0.1mm-20×20mm(generation 1) scanning

16)Graphic

Rectangular, Ellipse (standard)

17)Scanning velocity

0.1 to 9 cm2/s adjustable

18)CW: output power

1-30w adjustable

19)Pulse

0-999ms, 1ms adjustable

20)Ultra: Frequency

1hz- 000hz,

The RF equipment has the cooling system of surface layer, and uses proprietary technology

to deliver radiofrequency energy to the deep layers of the skin and its underlying tissue. The

heat will accelerate the blood circle, lets the fibre structure shrink instantaneously, and

stimulates the renewal of collagen. In response, the collagen shrinks and remodels over time,

providing you with tighter skin, renewed facial contours.

CO2 laser system

The CO2 laser with a specific wavelength of 10.6 nm can be absorbed by human body tissue (no matter what color the skin is) by nearly 100%. Through laser emitter, the micropulsed laser beam shoots on the target skin in nanometer level to achieve a controllable precise treatment .The dimension of shooting area only can be measured in nanometer, which is precise enough for operators to control and adjust the treated depth andlayer according to the clinical diagnosis.

The energy of CO2 laser is even and steady. Its focused energy aims only at target tissue without any injury to surroundings. It is the heat and electromagnetic effect of the laser that people use to conduct non-blood or less-blood cutting, cauterizing, gasification and accurate microsurgery so as to avoid skin burnt. During the treatment, biochemical reactions of optical-thermal accelerate collagen reproduction and skin recovery,after exfoliation of the tiny scar; fresh and smooth skin can be regenerated. The device outputs invisible laser. In order to operate with more ease, red semiconductor laser has been added to indicate.

20)Treatment control

footswitch

21)Environmental temperature

5-40oC

22)Relative Humidity

≤

23)G.W

65kg

24)Machine Dimensio

45cm× 50cm ×130cm

25)Power Supply

AC 220V±22V; 50hz, 3Amp