Tool-less Angled RJ45 UTP Cat6A Modular Plug for IP Camera

§ PRODUCT FACT

The 8P8C (8 position 8 contact, also backronymed as 8 position 8 conductor; often called RJ45 ) plug is the male type of modular connector commonly used for Ethernet over twisted-pair applications, where the plug on each end terminated using the T568A or T568B pin/pair assignments that are defined in ANSI/TIA-568-C.2 standard.

These connectors are commonly used in computer networking and other telephone applications involving unshielded twisted-pair (UTP), shielded twisted-pair (STP), and multiconductor flat cable. Most network communications today are carried over Category 5e, Category 6 or Category 6A cable with an 8P8C modular plug crimped on each end.

§ FEATURE

• Toolless

    - Crimping tool free.Do not have to maintain or prepare the crimping tool.

    - Easy & Convenient to terminate the plug with cable.

• Angle Adjustable

    -Prevent the cable excess bending.

    -Could be used in limited space environment.

• Mechanism Design

    -Reduce performance differences due to installation caused by different people.

§ RJ45 PLUG

- Contact: Gold plating in localized area over nickel undercoat

- Housing Material: PC, UL94 V-0 rated

§ IDC Connector

- IDC Contact: Phosphor bronze plated with nickel plating

§ ELECTRICAL CHARACTERISTICS

- Insulation Resistance: 100 M ohm

- Termination Resistance: 20 m ohm

- Dielectric Withstanding Voltage: 500Volts AC

§ CONDUCTOR ACCEPTANCE

- 22-24 AWG solid conductor with Max, 1.27mm Insulation O.D.

- Adaptable to cable O.D.: 4.0-8.0mm

§ ORDERING INFORMATION