200m truck mounted water well drilling rig

Specifications

Main features:
1.BZC200CA truck mounted drilling rig is designed by our engineers; it  adopts truck mounted and is a rotary drilling rig.
2.The truck chassis  adopts  the 6X4 special  crane chassis of brand CHANA TRUCK , the main transmit, transmission power, gearbox, sets of windlass, mud pump, sewage pump,mast are set up on the chassis.
3.This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2A mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit.
4.The power of drilling rig comes from the truck engine, the rig sets up distribute implement and hydraulic system.
5.We can set up the spare electric engine and clutch implement according to client's requirement, so that the rig can work with diesel engine or electric engine.
6.One set of 100Kw generator has been set on the chassis, it will supply the power to drilling rig, and it is convenient to illuminate or work at night.
7.The adding pressure device is hydraulic, so it has a high efficiency when the rig drill on mud rock and weathering formation through using the adding pressure implement.
8.The master driving of rig is mechanical, the four jacks and mast are hydraulic operated. Distribute box, sewage pump, master driving clutch system are air operated.
9.The appearance of rig is pretty, it has a high efficiency because of having a larger torque of the turntable, it is mainly used for water well, construction, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular with domestic and foreign clients. 
 
Technical parameter
 Drilling depth(M) 200
 Drilling diameter(mm) 500
 Speed of turntable(r/min) 6.7;10;17;43;63;108(reverse)
 Torque of turntable(KN.m) 14.5;9.7;5.7;2.3;1.5;0.9(reverse)  
 Single rope lifting capacity of mian windlass(KN) 30  
 The capacity of main windlass(KN)  180  
 Single rope lifting capacity of hydraulic windlass(KN) 30  
 The capacity of hydraulic windlass(KN) 120  
 The lifting capacity of hook(KN) 180
 Bearing capacity of mast (KN) 180  
 The height of mast (mm) 10200  
 Bearing capacity (t) 25  
Pipe
 Kelly bar(mm) 108×108×6000
 Assistant pipe (mm)89×10×4500
BW850/2A plunger pump
 Diameter of cylinder (mm) 150  
 Stroke of piston (mm) 180  
 Theory of flow (L / min) 600      850  
 Rated pressure (Mpa)     3         2
 Pounding  times (min-1) 58        82  
 Diameter of suction tube (mm) 127  
 Diameter of drain pipe (mm) 64  
 Input speed (r / min) 470  
 Input power (kw) 40  
 Overall dimensions (mm) 2000*1030*1400  
 Weight (t)1.5

Truck chassis
  Drive form 6×4    

Engine
  Model YC6J180-33 (Europe II emission standard)   
 Rated power(KW) 132 
 Speed (r/min) 2500   
 Size (L*W*H)(mm) 100320×2400×3200   
Electric generator
 Rated power (kw) 100  
Rated voltage(v) 400  
Speed (r/min) 1500   
Frequency(Hz) 50   

The highest speed(Km/h) 75   
 Weight (kg) 17340   
 Transport size(L*W*H)(mm) 10252*2400*3726   
 Working size(L*W*H)(mm) 10032*3570*11459