CPY3300 Series N+x Redundancy Modular system ups

• Modular parallel redundant N+X design for easy expansion
• Power modules share one common battery bank
• Output PF = 1 (KVA = KW)
• Green power design: efficiency ≥96%
• Clean power: Intput PF ≥0.99, THDi<3%
• Input/output isolation transformer
• True Online Double Conversion
• 5.7''LCD display
• Wide Input Voltage Range
• Smart RS232/USB + SNMP (optional)
• Full Digital Control

Single module capacity equal to or larger than 20KVA, effective capacity is more than or equal to 40KVA, N + 1 mode composed of parallel redundant system, the expansion capacity of at least 100 KVA in under the conditions of the original power module without change.

With separate monitoring module, the centralized monitoring module has the hot swap function, and the system can work normally when the module is pulled out.

In the whole system, the bypass is a decentralized bypass, and the system can avoid the single point of failure.

Power distribution module and the main engine as a whole and the rear type.

Single power module has independent display system and control system, when the maintenance is inserted or pulled out more convenient and safe.

1) rectifier input voltage range: 208VAC~478VAC (three phase / line voltage)

2) input power factor: full of more than 0.99

3) harmonic input current: full load is less than or equal to 10%

4) output voltage distortion: distortion of 3% (100% nonlinear load)

5) output power factor: UPS output power factor greater than 0.96

6) bypass input: +15% (optional +10%, +25%, +5%) - pass protection voltage limit: -45% (optional -20%, -30%) - pass frequency protection range: 10%

7) the power efficiency is more than 96%

8) output voltage regulator accuracy: 380 x (1 + 2%) VAC

9) output frequency accuracy: the city electricity mode, and the input synchronization; when the frequency of the city exceeds the maximum 10% (can be set 1%, 2%, 4%, 5%), output frequency 50 x (0.2) Hz; battery mode: 50Hz (0.2%)

10) output overload capacity: load is less than or equal to 110%, 60min, is less than or equal to 125%, maintaining 10min, is less than or equal to 150% to maintain 1min, is more than or equal to 150% immediately switch to bypass is connected with the battery nominal voltage: 32, 34, 36, 38, 40 optional section, UPS in the control module can set the charge and discharge period of time, their own battery charge and discharge management functions, battery protection, prolong the service life of the battery.

  erver, data centers, critical network devices, sensitive electronic equipment, telecom, enterprise servers, small and medium sized LANs, small rooms, small precision electronic instrument