Specification

SMPTE Standard                     425M Level A & B, 424M, 292M, 259M-C
SDI Transmission Rates         2.970Gbps, 2.970/1.001Gbps,1.485Gbps,
                                                  1.485/1.001Gbps, and 270Mbps
Input Port                                 1×BNC (SD/HD/3G-SDI)
Output Port                              1×BNC (SD/HD/3G-SDI bypass),

                                                  1×HDMI (Type A connector),

                                                  1×DVI with Audio

                                                  1x VGA with Audio
                                                  1×Composite with R/L
ESD Protection                        Human-body Model: ±8kV (air-gap discharge)
                                                                                   ±4kV (contact discharge)
SDI Cable Distance                 3G up to 100m (BELDEN 1694A Cable)
                                                  HD up to 200m (BELDEN 1694A Cable)
                                                  SD up to 300m (BELDEN 1694A Cable)
Dimensions                             110mm (W)×288mm (D)×32mm (H)
Weight                                      750g
Chassis Material                     metal
Relative Humidity                    20~90% RH (Non-condensing)
Power Consumption               5W

Operation and Fuctions

Front panel

1.       BLACK Button: Press this button will output Black screen signal to HDMI/DVI/VGA/Composite port display.

2.       HDMI/DVI/VGA OUT button: Press these buttons to select the HDMI/DVI/VGA port resolution.

3.       CVBS OUT button: Press these buttons to select the composite output port format.

Rear panel

1.      SDI IN:Connect to the SDI output of the SDI source device.Accepts SD,HD or 3G SDI signals.

2.      SDI LOOP OUT: Provides a 'loop-through' SDI signal output for connection to a SDI display.

3.     OUTPUT: These slot is where you connect the HDMI/DVI/VGA/Composite port display with cable for input source display.

4.     DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.

5.     ON/OFF: Power ON/OFF.

  Connection Diagram

Shipping