HDMI switch 4by1, Quad Multi-Viewer With Seamless, support button,IR,RS232, super quality

HDMI 4x1 Quad Multi-Viewer With Seamless Switcher

This product is a high performance 4 by 1 Quad Multi-Viewer with seamless switcher. It supports four High definition input source display on one screen, and have three multi-view effect mode. As a switcher, it can also seamlessly switch the four HD input freely. The product can be controled by various ways, through the front panel button control, IR control,  RS232 control etc. The product provides an S/PDIF link to output the HDMI source audio at the same time. In addition,this prodcut have basic version and extender version.The Extender version can extend the video and audio signals over single 50m CAT5e/6 with Bi-directional IR control.

Feature

1.     Compliant with HDMI 1.3a,HDCP 1.2;
2.     Supports multiplexed HDMI 4-input and 1-output;
3.     Supports up to 1080p High Definition resolution;
4.     Support 4by1 Quad Multi-viewer and seamless switch;
5.     Support scaler up,scaler down function;
6.     Support multi output resolution;
7.     Support digital audio format LPCM/AC3/DTS 
8.     Support button,IR,RS232 etc various controlled ways;
9.     IR system allowing for control of source at display end;
10.     Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6 cable(Extender Version).

Specification

Video Bandwidth                   2.25Gbps

Input Ports                             4 × HDMI (Female type),1x RS232;

Output Ports                          1 × HDMI (Female type),1xRCA,1xUTP(Extender version)

Audio output                          PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1

Input Resolution                   480i60Hz,480p60Hz,576i50Hz,576p50Hz,720p50/60Hz,

                                                1080i50/60Hz,1080p24/30/50/60Hz,800x600@60,

                                                1024x768@60,1280x720@60,1920x1080@60;

Output Resolution                1080p,1080i,720p,1024x768,1360x768

ESD Protection                       Human Body model:         ±8 kV (air-gap discharge)

                                                                                        ±4 kV (contact discharge)

Power Supply                         12 V/2.5A DC (US/EU standards, CE/FCC/UL certified)

Dimensions                             118mm(W) X 250mm (D) X 32mm(H)

Weight                                     750 g 

Chassis Material                     Metal

Silkscreen Color                     Black

Operating Temperature         0 °C~40 °C/ 32 °F~104 °F

Storage Temperature             −20 °C ~ 60 °C/−4 °F ~140 °F

Relative Humidity                    20~90 % RH (non-condensing)

Power Consumption               10 W

Operation and Fuctions

Front panel

1.       ON/OFF: Power on/off switch.

2.       SERVICE: For factory use only.

3.       IR : Remote control receiverwindow.

4.       POWER LED: This red LED illuminates when the device is connected with power supply.

5.       IN1,2,3,4 LED: These red LED illuminates when the output select to the corresponding input.

6.       INPUT BUTTON: Press this button to select the input source.

7.       MODE BUTTON: Press this button to select the multi-view display mode.

          see the detail description below(chapter 5.7).

8.       RESO BUTTON: Press this button to select the HDMI output resolution.

  Rear panel (Basic Version)

1.     Input: These slot is where you connect the HDMI source output from DVD, PS3,Set-top Box and Note Book.

2.   OUTPUT: The HDMI is where you connect the HDTV or monitor with HDMI cable for input source display.The UTP port connect to CAT Receiver by CAT5e/6 cable for signal extend.The Coax is where you connect to the amplifier with coaxial cable.

3.      IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.

4.      IR TX: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled.

5.     RS232: Connect the RS232 port to the PC or notebook by RS232 Cable.

6.     DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.

CAT Receiver(Extender Version)

 DC 5V: Connect from 5V DC power supply into the unit and connect the adaptor to an AC outlet.

 IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.

 IR TX: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled.

 CAT5E/6:Connect the CAT input of the receiver with the CAT output of the transmitter with CAT5E/6 cable.

 HDMI OUT: This slot is to connect the HDMI input port of your display such as an HDTV.

 LOCK LED:This LED will illuminate when the HDMI signal  from the transmitter is stable.

 Power LED: This LED will illuminate when the device is connected with power supply.

 Coaxial out: This slot is where you connect to the audio amplifier with coaxial cable.

 ARC : Switch the ARC switcher will open or close the ARC fuction.

ARC fuciton : If you need use ARC,your HDTV must support this function, When you open the ARC fuciton,the coaxial of the receiver will output the HDTV current display content audio signal. Otherwise will output the HDMI source(DVD,set-top-box ,etc) audio signal.

Connect and Operate

1.        Connect the signal sources such as Blu-Ray Player, Play Station 3, audio/video receiver, satellite receivers and computers equipped with HDMI output interfaces with a short high-speed HDMI cable to the HDMI Switcher inputs.

2.        Connect the HDMI output of the HDMI Switcher to a high-definition display device such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces. Use high-speed HDMI cables that are recommended for the distances that are required for each connection.

3.        The Switcher is powered by an external power supply which is included. Connect power first to the source, then to the Switcher and then to HD TV or projector.

4.       The input source can be controlled from the display. This is accomplished by using an optional IR Receiver pigtail pointing away from the display(s), which can be connected with an optional HDMI IR Adapter , and inserted between HDMI cable connector and display with the toggle switcher at the “IR” position. The IR Transmitter pigtail is used to connected to the switcher and pointed to the source(s). The switcher also have a capability of being controlled via Remote control.

Wideband IR(30KHz---60KHz) introduction

IR BLASTER (TX)

To control the source:  Plug IR Blaster into IR TX port of transmitter unit; place blaster in front of the IR eye of the source.

IR RECEIVER (RX)

To control the source:  Plug IR Receiver into IR RX port of receiver unit; place receiver at or near display.

Connection Diagram

Basic version:

Extender version: