Electrically controlled dual-fuel engine trainer

Sea worth package

Product description

The trainer is based on the electronically controlled duel fuel engine. Engine can be run, starting acceleration, deceleration, fault detection and diagnosis, fault simulation, and rule out the condition of the actual operation. It can truly show the gasoline engine structure and principle and working process. It is suitable for automotive electronic control engine theory and maintenance training needs of teaching in education and training institutions.

Structure and composition  

Electronically controlled duel fuel engine assembly, original car engine control computer, combination of instruments, engine start running all original car attachments, failure to set up and troubleshooting system, original car circuit schematic board and detection terminal, a 60AH large capacity battery, Large capacity stainless steel tank, the engine acceleration, control panel cabinet, removable bench, bench power master switch, OBD diagnostics, cooling systems, bench Operating Instructions, sensors and actuators installed digital display table, shelf-mounted fuel pressure gauge and vacuum table with locking casters, the 32MM round stainless steel handrails, stand high temperature and rotation parts of the installation of protective devices.

Features

1. Normal engine operation, starting, idling, the normal acceleration performance

2. Fault simulation systems can simulate actual operating conditions, common failure to set a variety of real car engine

3. The voltmeter can show the real-time change of the sensors and actuators and the injector pulse displays the working status of oil of the original device through the LED light.

4. Pointer fuel oil pressure gauges indicate pressure value and pointer vacuum gauge indicates vacuum pressure value

5. With the diagnosis of the original car seat, it can use computer diagnostic equipment to read fault codes and data flow of the engine control system.

6. The training bench panel with 5MM quality aluminum plate fine spray color circuit schematics will not change its color or fade or deform for more than 10 years. The nice argent material package side is better than retrofitting plexiglass system (The plexiglass is easy to break or deform due to the time and environment.).The students can understand and analyzing how the control system works directly by looking at the circuit diagram and the engine.

7. The detecting terminal is mounted on the panel of the training bench. Each of the sensors, actuators can be detected directly on the panel. The engine controls unit pin electrical signal, such as the resistance, voltage, current, frequency, waveform signals and the like.

8. The training panel is installed with the main power switch, tank guard, flywheel and other rotating parts shields and other safety protection device.

9. The base portion of the training panel is welded with steel structure .The panel cabinet is stamped and it is separable from the base. The bench surface has used the paint technology with a direction of self-locking casters device.

10. Fault setting function:

The user can choose the fault setting function. Manual fault setting or intelligent fault-setting can be used to test the equipment. (Equipped with a communication interface and network interface)

Technical parameter:

1. Dimension: 1400x1000x1800mm; (L x W x H) 

2. Working power: 12V/60AH battery            

3. Fuel tank capacity: 10L/gasoline, 2m³/gas 

4. Working temperature: -40℃~50℃     

5. Panel process: Aluminum panel with surface oxidation painting and UV Flatbed high true color schematic. It is durable and nice.

6. High-quality steel: 40x80x3.0 steel

7. Safety fence: 3.0 stainless steel  , 6CM punching board

8. Maintenance intervals: 90 days

Suitable car or engine models listed below: