PVD vacuum sputtering deposition equipment/high vacuum coating machines for metallization

PVD vacuum sputtering deposition equipment/high vacuum coating machines for metallization

[We provide technical consulting service and modification solution for old machines]

----------------------------------------------------------------------------------------------------------------------------------------

Hello, Thanks for coming in our products.
We would like to talk what you demand freely with sharing good information.

VACUUM METALIZING (Sputter Coating Process)
GENERAL:
A variation on Vacuum Metalizing (Filiment Evaporation/Cathode Arch/Sputter) called "Low Pressure Deposition."
• Does not utilize complete atmosphere removal (vacuum)
• Utilizes a basecoat, but a highly polished mold/amorphous materials don't need.
• Deposition is very uniform and controlled.
• Creates a very bright appearance (varies with thickness & basecoat color)
• Materials that oxidize must be top coated - is metalizing, not plating.
• Aluminum oxides, chrome, stainless steel.
• Does not oxidize - no top coat required.

SPUTTER COATING PROCESS

• Parts are sprayed with a basecoat (becoming obsolete in new technology with highly polished molds using amorphous materials).
• Parts are racked, racks put into the chamber, the chamber is then sealed.
• Argon gas is introduced into the chamber in a continuously flowing manner.
• Electricity creates an active argon plasma field in front of the cathode. (The cathode is an assembly which contains magnets and provides a mounting for the target - a plate of the material which will be deposited.
The magnets are located behind the target.)
• The positively charged (ionized) Argon atoms are accelerated by passing through a magnetic field(created by magnets inside the cathode).
• The positive atoms are attracted to the negative charged cathode which contains the target.
• The target is bombarded with each ion particle, they individually break off ("chip") an atom of the target material with each collision (target hit continuously).
• Continuous (and directed) sputteing of tghe release target atoms are "shot" onto the surface of the part(direction is assisted by the magnetic field - perpendicular to the target.

• The basecoat material/paint (or high gloss amorphous part) provides a smooth surface for the atoms to be deposited together and build up on the part.
• The part is top coated with HMDSO (in monomer form, polymerized by passing through a plasma created by high voltage rods - the polymer condensates onto the coating surface).
• The chamber is vented and parts removed/reloaded.

----------------------------------------------------------------------------------------------------------------------------------------

Custom-Made PVD Coaters:

Export Standard Packing:

Installation&Operation Training:

----------------------------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Thanks for your kind attention.