Permeability epoxy floor primer paint

Permeability epoxy floor primer paint

Solvent based epoxy floor from the beginning for functional floor: such as anti-corrosion, wear-resistant, non slip, developed to general industrial flooring; in addition to functional requirements, but also has a decorative effect. Solvent based epoxy floor paint is a high strength, wear resistance, appearance of the floor, with no seams, solid texture, drug resistance, anti-corrosion, waterproof, dust proof, easy maintenance, low maintenance cost, etc. advantages.

Applied substrates: ordinary workshop dust, environmental requirements is not high cement base such as: factories, rooms, warehouses, underground parking room, the workshop.

Construction proportion: solvent based epoxy floor paint A group: B group =25: 5 (weight ratio)
The construction area of 0.5kg/ square meters (the actual consumption due to the design thickness vary)
Construction tools: roller or trowel

1, after coating completely dry, the solvent based epoxy floor coating construction, and ensure the surface coating construction to achieve the design thickness requirements.

2.Mixing the epoxy floor paint material at first,then according to the proportion of the main material and curing agent to fully mix, 10 minutes after the stationary curing use immediately.

3.The solvent type oxygen paint prepared by roller coating uniform at the grassroots level 2 times.

Attention:
1, construction temperature is recommended at the bottom of the temperature at 2 degrees <~<50 degrees C

2, preparation of epoxy finish good should be finished within 2 hours, the initial setting of epoxy paint can not be used again.

3, the ground must be cleaned up, close the doors and windows of the intact to determine the construction environment of space dust and lint content of less, the construction personnel should wear clean and dust-free clothing and shoes, in order to protect personnel in the operation does not produce a lot of dust.

4, construction tools must be cleaned after the use of epoxy diluent dry backup.