dry powder fire extinguisher

dry powder fire extinguisher

Model GFM16-1 dry powder filler is a new product developed by our factory after absorbing the advantages of powder fillers at home and abroad. It can quickly suck dry powder into the cylinder and be directly filled in the container by vacuum fluidics, and it can also conduct sucking and filling simultaneously. It features small volume, easy movement, simple operation and lack of environmental pollution. Thus labor intensity is decreased and work environment is improved. It is especially suitable for the filling, production and maintenance of dry powder extinguisher and also suitable for filling various powder products. So it is an ideal equipment in the powder filling industry.

Terchnical parameters

Volume: 870×590×1320mm

Weight:110kg

Voltage:AC 220V/380V

Power:1.1KW

Filling rate:5kg/min

Filling residue:1kg≤0.04

The photos of machine:

II Directions for Use

The filling machine adopts two methods of filling:

The first method of filling:

1. Check if the connection of hose is firm.
2. Power source is turned on is turned on.
3. In trial run, the machine should be earthed. After energization, put the machine to a trial run to see if the air pump turns to the required direction.
4. When containers of different volume are filled, the rubber seal loop over the bottom of the port should be in alignment with the inlet of the container in line with the height of the cylinder and different aperture.
5. When filling is done, valve in the bottom of the cylinder should be opened
6. Measure in combination with“subtraction weighing process”.The powder source is placed on the scale and total weight weighed. Weighing is fixed on: Total weight known----weight to be filled = weighing position to be ascertained.

This measurement is the “Subtraction Weighing Process”.

7. Turn on the start switch and the pump begins to work. Then the suction pipe
is placed in the powder source. Powder is sucked into the powder cylinder

through a pipeline. When the weight approaches the quota, powder suction

may be reduced properly through powder suction pipe. Once the set weight is reached, the suction pipe is taken out and inserted into the base properly.

1. The stem of direction valve is pushed for several times so that the powder residue in the cylinder may be removed thoroughly.
2. The valve is closed, powder cylinder is swung up and the fire extinguisher filled is removed, thus bringing the filling to an end.
3. For precise measurement, the filled container can be weighed again for revision.

The second method of filling:

1. Check if the connection of hose is firm.
2. Power source is turned on.
3. In trial run, the machine should be earthed. After energization, put the machine to a trial run to see if the air pump turns to the required direction.
4. Unload the powder suction pipe from the dry powder –filling machine. Connect the side suction pipe over the powder suction end cover to the powder suction port of the cylinder well.
5. The fire extinguisher to be filled is placed on the table of electronic scale. The filling end cover is put on the extinguisher. Press the tare-reduction key and the scale will return to O position.
6. Turn on the start switch and the pump will begin to work. Then the suction pipe is inserted into powder source. Powder is sucked into the fire extinguisher through a pipeline, when the weight approaches the quota,

Powder suction may be reduced properly through the powder suction pipe.

Once the set weight is reached,the suction pipe is taken out and filling comes

To an end.

Please contact me freely if you are interested in any item,

I will provide youwith my best service ,best quality, and timely shipment.

You can send me E-mail or Fax 0086-318-7321606 or give me a call :

86-18831809893

Thanks in advance

We have abtained the ISO9001-2008 Certificate and CE Certificate, and Original of Certificate can be supplied if needed

Please contact me freely if you are interested in any item,

I will provide you with my best after-sales service ,best quality, and timely shipment.

You can send me E-mail or Fax 0086-318-7321606 or give me a call :86-18831809893

Thanks in advance