1000Mbps USB3.0 to Ethernet Adpater Ethernet Wifi Adapter

Specification

1. USB3.0 to RJ45 adapter supports Gigabit networking over USB 3.0 with up to 5Gbps;
2. IEEE 802.3, 802.3u and 802.3ab (10BASE-T, 100BASE-TX, and 1000BASE-T) compatible;
3. USB-Powered, with no additional adapters required;
4. Supports suspend mode and remote wakeup via link-up, magic packet, or external pin;
5. Supports Full and Half duplex operating modes;
6. Backwards compatible with USB 2.0 & 1.1;
7. Hot-Swap and plug-and-play supported.

Features and Advantages:

1.Classical design, easy to use.
2.Compliant with Tablet computers, adjust to MAC OS system, no driver required with apple Tablet computer.
3.Broadband network with USB interface data transmission, apply to the desktop and laptop computers.
4.Support hot swaps.
5. neutral English clamshell packaging carton.
6.This device complies with USB Specifications 1.0 and 1.1,and uses a USB type A connector to connecter to the USB host device drows power from the USB host bus, therefore no external power supply is required.
7.Support full-duplex data flow control (IEEE802.3X).
8.Support Protocol: IEEE 802.3u standard.
9.Support Performance USBV1.1 standard, Support full-duplex and half-duplex transmission speed for 10 and 100 ,1000Mbps operation.
10.Interface: USB,RJ45.
11.Support all USB standard command.
12.Supports Suspend/Resume detection logic.
13.18K bytes SRAM built in. (2K bytes for Tx buffer, and 16K bytes for Rx buffer).
14.Compliant with PCI revision 2.2.
15.Supports ACPI, PCI power management.
16.Compliant with PC99 standard.
17. Integrated Fast Ethernet MAC, Physical Chip and transceiver in one chip.
18.Support System: Windows/2000/2003/XP/Vista/7/8/Linux/WinCE(5.0 6.0)/ANDROID(2.1 2.2 2.3 4.0)/MAC

Package Contents

1. USB 3.0 Giga lan card;
2. Driver CD.