1.2419 TOOL DIE STEEL

In bulk or as the mill

Specifications

1.2419 | sheet size: thickness 10mm-300mm
1.2419 | Steel Type: plate rolling machine, module, flat steel, round steel
1.2419 | Die Steel Origin: Germany Die Steel
 

1.2419 tool steel with high hardenability. Since the formation of tungsten carbide in this steel after quenching and tempering has a surplus of more than chromium carbide steel, and higher hardness and wear resistance. In addition, the tungsten can also help save the small grains, so that steel is a good toughness. Therefore, cutting tools madeby the 1.2419, the phenomenon of lesschipping and the blade can better maintain the shape and size.

 However, the steel more sensitive on the formation of carbide networks, this network exists, the tool blade has the danger of falling off, thus shortening the life of the tool, therefore, there is carbide steel mesh, must be based on its seriousness, Forging and normalizing. The steel used to make at work is not cutting edge tools and sharp hot quenching requires measuring and cutting without distortion,

1.2419 tool steel such as to produce knives, taps long, long reamers, special cutter, dies and other types of special tools and cutting tool of soft non-metallic materials.

1.2419 tool steel mechanical properties:

1.2419 Tool Steel Hardness: Annealed, 255 ~ 207HB, indentation diameter 3.8 ~ 4.2mm; quenching, ≥ 62HRC

1.2419 tool steel heat treatment and microstructure specifications:

1.2419 tool steel heat treatment specification: quenching, 800 ~ 830 °C oil cold.

1.2419 tool steel delivery status: the annealing state of delivery.

Related Products:1.2080,1.2436,1.2601,1.2379,1.2419,1.2108,1.2510,1.2363,1.3343,1.2344,

                            1.2343,1.2367,1.2713,1.2767,1.2714,1.2365,1.2885,1.2581,1.4031,1.2738,

                            1.2311,1.0503,1.0540,1.0535,1.1525,1.1545,1.2735,1.2764,1.4021,1.2361,

                            1.2316,1.4122,1.2327,1.2550,1.2782,1.2787