Home
Product Categories

Clear Coat

Heat Resistance

New Products

Paint

POLYURETHANE COATING

Primer

Spray gun

Thinner

Topcoat
Company Profile

Company Introduction

Photo Gallery
Blog
Quality Control
Contact Us

Home > Products > Topcoat > COLOR PAINT FOR CONCRETE FLOOR PAINT EPOXY FLOOR COATING

COLOR PAINT FOR CONCRETE FLOOR PAINT EPOXY FLOOR COATING

FOB Price

US$ 17.2 - 22.45 / Set

150 Sets(Min. Order)

Port Taichung Port Taiwan

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

CAS No.	38891-59-7	Other Names	Epoxy Floor Paint
MF	Mixture	EINECS No.	F-E
Place of Origin	Taiwan, China	Main Raw Material	Epoxy
Usage	Building Coating	Application Method	Brush
State	Liquid Coating	Brand Name	BUO GUH
Model Number	EP-01-02

Product Description

COLOR PAINT FOR CONCRETE FLOOR PAINT EPOXY FLOOR COATING

TOP COAT EPOXY RESIN PAINT
TYPE	A two-pack, multipurpose epoxy finish coating based on Epoxy Resin.
USES	Topcoat for cement products, bridge, steel pipes, steel structure of factories.
CHARACTERISTICS	1. Tough, hard film and high abrasion resistance. 2. Excellent resistance to sea water. 3. Excellent resistance to mechanical damage. 4. Very good resistance to oil and mild chemicals
APPLICATION METHOD	Spray, Brush, Roller.
COLOR	Desired colors
FINISH	Gloss
SPECIFIC GRAVITY	Above 1.1 kg/L, depending on colors (Mixture)
VISCOSITY (25℃)	70 ~85 KU (Mixture)
DRYING TIME (25℃)	Set-to-touch Dry hard Fully cured	3 hrs. 24 hrs. 7 days.
OVERCOATINGINTERVALS (25℃)	Min. Max.	8 hrs. 5 days. (25℃) or 3 days. (30℃)
OPTIMUM FILM THICKNESS	Wet Dry	100 microns 40 microns
VOLUME SOLIDS	Above 60%(Mixture)
THEORETICAL COVERAGE	10m2/L 9 m2/KG 38m2/GL
THINNER	Epoxy Thinner
THINNING RATE	5 ~10 %(by wt.)
PRECEDING COATS	Epoxy Primer
STORAGE SHELF LIFE	Minimum 1 year under normal storage conditions.
MIXING RATIO	Base : Hardener = 5 : 1 (by wt.)
POT LIFE	8 hrs. (Mixture) (25℃)
NOTE	1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Remove any soap, dust, rust, grease, old paint surface or any salt-containingchemicals before coating. 3. Avoid applying the paint in rainy weather or humidity above 85% RH, particularly, a wet surface must be thoroughly dried 4. All equipment must be cleaned immediately after use. 5. When used inside tanks, sufficient ventilation must be provided. 6. When overcoating interval is exceeded, paint surface must be roughened to insure adhesion. 7. Coating surface would be chalking by sunshine.

Detailed Images

Packing & Delivery

Certifications

Color

Our Company

Buo Guh PaintS Co., Ltd. was established by Mr. Yu-Kuang Tsai in 1979 in Dali, Taichung, Taiwan area and manufactures a wide variety of industrial paint and coatings. Buo Guh offers not only R&D and production of paints and coating, but also sales and provides after selling service. We have been an aggressive and respected manufacturer of paint and coatings for twenty years. We have experienced technical engineers and a qualified management team.

QR CODE 1 for the company Home

QR CODE 2 for the my Alibaba store

QR CODE 3 and 4 for the company's products videos

Contact Us

Buo Guh Paints Co., Ltd.: Contact nameJohn Tsai
Chat Now; Phone886-4-24065996; AddressNo. 637, Sec. 3

*Email
Please enter Your valid email address.
*To

John Tsai
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Clear Coat	Heat Resistance	New Products	Paint
POLYURETHANE COATING	Primer	Spray gun	Thinner
Topcoat

COLOR PAINT FOR CONCRETE FLOOR PAINT EPOXY FLOOR COATING

You May Like

Product Details

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category