galvanized corrugated iron sheets

Specifications

Corrugated roof sheet waved iron sheet 
1 Thickness: 0.14mm-0.6mm 
2 Width: 665mm-930mm 
3. Full hard 
4. Decoration sheet

5.Zinc coated:40g

Our advice for you;YX12-65-850

wave height;12mm  1 1/4 rib

two wave's width:65mm   2.6''  

effective width:850mm  33'' coverage width 

color: as you request

Method

Metal sheet is a square fluted profile with an effective covering width of 850 665... designed for use as

side cladding or roofing material in commercial, industrial and residential buildings. The name IBR is

abbreviated from "Inverted Box Rib" and has became household name in the foreign market

The deep broad flute design offers excellent drainage characteristics combined with optimum weight

versus load/span capabilities.

Structural guidelines.

IBR roof sheets are available in a wide range of materials displaying various structural properties. It

should be noted that the load span characteristics are only to be used as a broad guideline as purlin

spacing is also dependant on other factors such as the prevailingwinds in a certain area, snow during

winter periods, the presence of dust and other particles in industrial areas, the type of structure

that is being erected etc.. We therefore recommend that an engineer is consulted to determine the

purlin spacing for a specific application.

Available dimensions

IBR sheeting is available in standard lengths up to 15 metres. The permissible length tolerance for the

standard length range will be -+5 mm.sheets outside these parameters are available on request and

might be subject to special pricing arrangements. The maximum height whichcan be transported is 4.3

metres. This factor should be taken into account when bullnoses and curves are designed.

Roof pitch

When using IBR, the recommended minimum pitch for roof slopes in excess of 30 m is 7.5º and for slopes

 less than 30 m is 5º. When IBR roof sheets are end lapped the roof pitch should be taken into account.

The minimum end laps for roofs pitches in excess of 15º is 150 mm and for other roofs a minimum of 250 mm

 is recommended. End laps for side sheeting should be at least 100 mm. It is recommended that end and side

laps on low pitch roofs are sealed to ensure watertightness. 

Packing

ACCESSORY

Although we are one-year Alibaba member. But we have 14-year experience in building material and masonry material in domestic market.

trust us and we will give u a better future. Many soho through our company to export we open the foreign trade. foreign customer often

check the quality of our product. we would try our best to help u. best quality and service to u. Recently, we open the trade assurance, If u don't satisify

my product ,back it.