Liquid Granite Spary Paint for Wall Marble Effect Paint

Refined by high quality emulsion binder,with special fillers and functional additives,you can obtain the simulated granite,marble,dimension plates,wallpaper and other decorative effects through the corresponding construction technology. It is suitable for smooth or rough surfaces such as interior and exterior concrete mortar wall surface, sand and stone surface, gypsum board and plywood.

Characteristics:

Instruction standard:

Construction steps: 

1.Wall treatment: remove loose paint,wash off any dirt and grease ,remove mildew stains on the wall if there are any,fix imperfections on wall.

2.Prime:use Primer & Sealer for priming,this procedure can not be skipped.

3.Application: make sure this product is fully mixed and then apply the first coat, apply second coat when the first coat is totally dry.

4.Varnish: apply 1- 2 coats of varnish if necessary after the paint is dry.

Pay Attentions:

1.The product shall be stored in cool ,dry place ,avoid sunshine,0-40 ℃.

2.Try to avoid strong wind when applying, working condition:T>5 ℃,H<85%.

3.Do not mix the paint with other organic solvent.

4.The wall surafce should be free from grease and stain, no loose parts and other dirts.

5.Allow the new stucco, plaster,masonry to cure for 30 days before priming.