TDR Testing 3.5'' LCD CCTV Tester L-T2622T IP&Analog Camera Tester Wire Tracker PTZ Visual Fault Locator UTP Cable Testing

Specifications

TDR Testing 3.5'' LCD CCTV Tester L-T2622T IP&Analog Camera Tester Wire Tracker PTZ Visual Fault Locator UTP Cable Testing

Features

1. English, Chinese and other languages optional
2. 3.5'' TFT-LCD, 480(RGB)x320
3. LED Lamp, easy to operate at night.
4. Micro SD card moveable
5. User-defined shortcut keys (F1 and F2)
6. LCD screen brightness/contrast/color saturation adjustable
7. Automatically adapts and displays the video format of NTSC/PAL
8. 10x zoom, video image can be magnified to view the details, easy to use
9. Video record and playback
10. Snapshot and save the current images as JPG file in the SD card
11. PING testing, test IP camera or other network devices’ ethernet port whether work normally, and the IP address whether right
12. IP address scan, quickly search the IP address for the connected IP camera and other network devices.
13. POE voltage measurement, test the PoE switch’s voltage to IP cameras, wireless AP device and other PD devices
14. Device Port flicker, easy to find the connected PoE switch port by sending special signals, the connected PoE port will flicker at special frequency.
15. Link monitor; check the setting IP address whether occupied.
16. TDR break point and short- circuit measurement(BNC cable, network cable etc)
17. PTZ address scan, search up the ID of PTZ camera
18. Network cable and Telephone cable testing, display the sequence of connection and the NO of the LAN cable
19. Support RS232/RS485/RS422, Rate 600~115200bps adjustable
20. Multi-protocol. Support more than thirty PTZ protocols. Such as PELCO-P, PELCO-D, SUMSUNG
21. PTZ protocol analysis, control protocol command displays to check RS485 transmission whether is normal, easy to find the fault device
22. PTZ control. Pan/tilts the P/T units, zooms in/out the lens, adjusts the focus, aperture and sets and the preset position
23. DC12V 1A power output for camera
24. Audio input test, test the audio signal from pickup devices
25. Visual fault locator, to test fiber’s bending and breakage
26. Lithium Ion Polymer Battery. The device employs advanced power control and protection circuit. The device is high power-efficient, energy saving and environment protection. It can last 11 hours for normal use after charging for 4-5 hours. 

Specification

Comparison among L-T26xx series

There are function differences among our 18 models of CCTV testers and for details, please refer to below table. The only difference between L-T26xx and L-T26xxT is L-T26xxT is with TDR test function while L-T26xx is without this function. Please make sure you are ordering what you really want. Thanks.