Enhanced Graphite Gasket

Specifications

Graphite Gasket

Enhanced Graphite Gasket,

Thickness: 1mm over (mm)
Material: stainless steel graphite increases
Use temperature: -200-550 (°C)
Pressure :40-250 (MPa)
Graphite composite gasket known as enhanced or high-strength graphite gasket graphite gasket graphite sheet is enhanced by drilling or cutting, and it has a good anti-corrosion resistance, high / low temperature, good elasticity and high compression strength of . Commonly used to enhance the inner graphite gasket materials to enhance ss304, ss316 or tinplate and so on, the thickness of 0.1 ~ 0.127mm, the form of enhanced sprint board, network board increased,enhanced flat-panel. 304 commonly used to enhance the graphite materials can be made into a variety of geometric circular pads are widely used in piping, valves, pumps, pressure vessels, heat exchangers, condensers, generators, air compressors, exhaust pipe , refrigerator and so on. Graphite gasket can be cut to enhance the shape of the complexity of the gasket, such as the water level gauge pads, punching pads and automotive diesel engine flange of the cylinder gasket. According to the use of high-strength graphite gasket.
need to be processed into the following forms:
1. Basic graphite composite gasket.
2. Bag while graphite composite gasket.
3. Packet outside the graphite composite gasket.
4. Within the outsourcing side of graphite composite gasket. Graphite composite gasket package while maintaining theoriginal form of the excellent performance pads, but also easy to install, demolition, not damaged, but also to prevent the erosion of media on the gasket to raise
the pressure. Commonly used material for the package edge 304 or 316 stainless steel.