Portable Leeb Hardness Tester/Meter/Gauge MH310 Measure metallic materials,HRB, HRC, HV, HB, HS, HL

 

ADVANTAGES

1.Wide measuring range. Based on the principle of Leeb hardness testing theory. It can measure the Leeb hardness of

all metallic materials.

2.Large screen LCD, showing all functions and parameters. With EL background light.

3.Seven impact devices are available for special application. Automatically identify the type of impact devices. Test at

any angle, even upside down. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.

4.Large memory could store 100 groups (Relative to average times 32~1 ) information including single measured

value, mean value, impact direction, impact times, material and hardness scale etc.

5.Battery information showing the rest capacity of the battery and the charge status. User calibration function.

6.Software to connect to PC via USB port. Thermal printer integrated, convenient for in field printing. NI-MH 

rechargeable battery as the power source. Charge circuit integrated inside the instrument.

7.Continuous working period of no less than 150 hours (EL off and no printing). Auto power off to save energy.

8.Outline dimensions:212m ×80mm×32mm

MAIN APPLICATION

Measuring range   HLD170~960 HLD

Measuring direction   360°

Hardness Scale   HL HB HRB HRC HRA HV HS

Display segment LCD

Data memory  100 groups

max. relative to impact times 32~1

Printing paper: width is  57.5±0.5 mm, diameter is 30mm

Battery pack: 6V NI-MH Battery charger: 9V/500mA

Continuous working period about 150 hours With backlight off, no printing

Communication interface USB1.1

Outline dimensions 212mm×80mm×32mm

CONFIGURATION 

(Julie Zhou)