pp melt blown spun filter cartridge making machine

Product Description
PP melt blown/meltblown/spun filter cartridge making machine/ production line is a machine that used to produce pp melt blown/meltblown/spun filter cartridges which are widely used both in household water purifier and industrial wastewater pretreatment. And the principle of this machine is as below:
There are two kinds of PP melt blown/meltblown/spun filter cartridge making machine/ production line, one is adopting roots blower as the pressure –driven system; the other is using air compressor with air tank. Whatever both principle is similar as below:
Auto Feeder feeds 100% new drawing class polypropylene into Extruder. Then pp materials are melt by heating through Extruder. Roots Blower or Air Compressor and Air Tank blows the air into Air Heater and then the heated air will blow the liquid melted polypropylene materials through the Nozzle Heads (with hundreds of small holes in the mold), and finally threaded materials arrive at the spindle of Winding Device. Winding Device rotates and forms filter cartridges. Then formed pp melt blown filter get off the spindle and reach to Auto Cutter. Auto Cutter cuts them according to the required length upon customers’ requirements.

1E1M PP melt blown/meltblown/spun filter cartridge making machine/ production line includes:
1 Extruder;
1 Mold;
1 Auto feeder;
1 Air Heater;
1 Roots blower with inventer;
1 Air Tank;
1 Receiving Machine& Auto Center;
1 Small Controller;
1 Cleaning Machine for cleaning the mold.

Differences between PP melt blown/meltblown/spun filter cartridge making machine/ production line with Roots Blower and machine with Air compressor and air tank

Parameter

We are also a without inner screw filter making machine provider. If you want to know the machine, kindly contact us for more details.

Additional equipments for PP melt blown/meltblown/spun filter cartridge making machine/ production line

Groove machine is used to cut grooves on the filter surface. 

Line surface maker is used to cut lines on the filter.

Dotted surface maker is used to make dots on the filter surface.

Logo machine is used to print logo in the surface.

Crusher is used to crush the clean wasted PP raw material into small granules.

Mold clean oven is used to clean the mold after long-time use.

Training: 2 solutions

1. Welcome to stay in our factory for a long-term training 7~14days until you master all the skills.
2. We provide an installing and training service to your factory in 7~14days until you master all the skills and you should take care of the plane ticket, hotel and living cost during this time.

After-sale Services
One-year warranty is ensured. We provide new parts (except easy-wear parts) for free if your machine is broken without human factor.
If you have any questions, our engineers are always available to give a comprehensive answer with their 30-year experience in filter making industry.


Packaging & Shipping

Every part is packed by plastic film, and all are packed in wooden case.
Shanghai Port is our usual choice, but other ports are available due to your requirements

Company Profile
Wuxi ANGE Environmental Technology Company Limited is a professional manufacturer specializing in full automatic PP melt blown filter cartridge making machine. We excel at PP Melt Blown Filter Making Machine, PP string wound filter making machine, CTO active carbon block filter making machine and PP non woven fabric making machine with 20 years’ experience in machine design and filter making factory. We value the quality and the cost for clients very much, as well as providing unlimited long-term technical guide by email or Skype. It is our supreme honor to have clients in our factory for a visit. Customers around the world are always welcome with extreme hospitality.