Ptz Wireless IP Camera Display 7" HD LCD Monitor For CCTV CAM Video Audio Tester

Specifications

7" HD LCD Monitor For CCTV CAM Video Audio Tester,Ptz Wireless IP Camera Display

The new IP Camera tester is developed for the On-Site installation and maintenance of IP camera,analog camera , with Video display, PTZ control, DC12v output power, Audio test,PING testing, IP address scan;The new tester designed with easy operation and portability makes it simple for a cctv technician or installer to install and maintain CCTV systems, improving work efficiency by reducing time in the field.

Onvif ip Camera test;

Analogy camera test,scan not support Video record function now!

Onvif PTZ controller

RS485 For PTZ Control

 7 inch full-view HD TFT-LCD, 1024(RGB)x600p

— 7 points multi-touch panel

— low consumption, work for 8 hours

— OSD menu, English,Chinese

— Automatically identify and adapt the video mode of NTSC and PAL

12v output

— IP address scan, quickly search the IP address for the connected IP camera and other network devices

— Multi-protocol. Supports more than thirty PTZ protocols. Such as PELCO-P, PELCO-D,

— Support RS485

1 . Video signal testing

      The new ip camera tester, built-in high definition 7”HD LCD-TFT 1024(RGB)x600

full-view display screen, easy and directly displays the camera image quality

      Support PAL/NTSC

    LCD screen brightness/Contrast/Color Saturation adjustable. Suitable for field construction and maintenance work

 2. PTZ controller

Display the input video images. Pan/tilt the P/T unit and zoom in/ out the image. Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; set and call preset position.

3. DC12V 700mA output power

Power the camera with DC12V (700mA) power output from the tester. 

4. Audio testing

Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable

5. IP address scan

In digital IP surveillance applications, if IP camera’s IP address is not clear or forgotten; the device cannot be used .

IP address scan can quickly search the connected IP camera or other network device’s IP address.

6. PING test

PING is the most conventional network debugging tools; It is used for testing if the connected IP camera or other network equipment’s ethernet port is working normally and the IP address is correct.

Real test demo for reference:

This ip camera is not included in package,just for referece!

step1: Switch DC 12V output

step2: plug power cord & netword cord to camera

Step3: Open onplayer software,and press menu"IPC search"

It will display camera IP and next,you can press its IP address to get image from this IP camera!

Specification:

 The above information is only for reference. More information, please contact us.

 What is in package?