Agro-waste Processing Machine

Specifications

Introduction:  

Yugong Brand Agro-waste Processing Machinery has introduced into advanced technology,invented SJM5 flat-dies pellet mill machine.

This kind of agro-waste processing machine can produce a special coal (High efficiency fuel) with many kinds of agricultural waste as raw material, such as crop straw, rice hull, peanut hull, corn straw, sawdust and so on , as well as the material own low adhesion rate and that difficult to forming. 

The heat quantity caused by burning the fianl product is equivalent to coal, and moreover, the quantity of carbon dioxide in smoke dust, especially the quantity of sulfur dioxide.  Also the agro-waste processing machine costs much lower than the same type of machine. The final product mainly used as fuel in furnace,boiler and power plant, the clinker after burning was directly used as fertilizer. 

Through continuous improvement, the agro-waste processing machine has been able to meet production needs of different countries. The most outstanding advantages of the briquetting machine are high output, smooth rotation and low energy consumption. It's really a good kind of renewable green energy machine .   

Compared to ring-dies briquetting machine---The ring dies briquetting machine is restricted by ring diameter,its roller can not be enlarged enough, roller bearing room is smaller, so the assembly bearing is not strong enough to withstand pressure,so the problems come to being:bearing's less standing ability leads to frequent repair.

Characteristic:  

1.The mould & rollers are made from special alloy and processed by special method & treatment,

   so with extreme durability.Successfully overcomed the poor resistance of traditional mould &

   roller.

2.It adopts screw-center adjusting pressure structure,the pressed rollers' gap can be  adjusted

   smaller or bigger,so it can meet different materials' demand and make sure the briquetting effect.

3.Main equippmed with specially desinged screw conveyor which has speed control device,

   thus can realize feeding steadily and cleanly for all kinds of raw material.

4.Main machine,screw conveyor and speed control device can be operated through one combined

   control panel.Which is more convenient and labor-saving.

5.With 1 year warranty.