High temperature resistant heat insulation and preservation coating

Specifications

[Characteristic]

 Shielding heat rate: 90%                  

 The coefficient of thermal conductivity: 0.03w/m.K

 The level of :A                                                            

Anti Acid (500h):unchanged

[Application]

High temperature kiln chamber, the high temperature pipe, low temperature cold storage pipeline, etc

[Package]

1/20kg

[Function]

 The temperature can be lowered from 1700°C to 100°Cafter coating12mm GD-1.

 The heat loss will be not more than 30% in external surface of hearth kiln only with 6 mm of GD-1 .

The surface with the coating will be smooth and reflect IR from fire, so it can decrease the loss

of absorbing heat, and the temperature will be higher , and the energy will be saved.

    Below zero 30 °C, the temperature of case with 10mm GD-1 will not over 0°C.

There is no chlorine ion in the coating, so can prevent or in the process of wet chloride and

sulfide in air l can’t contact the metal surface to get good anti-corrosion for metal surface also won’t lead to metal welding embrittlement.

The insulation coefficients is very high, so it has good insulation effect in room temperature

and high temperature .

The coating also can be fire retardant, different requirement different thickness, the things

with the coating can be barbecued and deform, the things can be protected.

[Caution]

Every time thickness is about 1 mm, two hours later after evaporation of water fully, then the

coating can be coated repeatedly.