N2XY cable XLPE Insulated Low Voltage Power Cables

Specificaton

N2XY cable XLPE Insulated Low Voltage Power Cables

1. Conductors: copper or aluminum.

2. Both armored and non-armored type power cables are available.

3. Voltage rating: 0.6/1kV 3.6/6kV 6/10kV 8.7/15kV 26/35kV.

4. PVC or PE sheathed.

5. Number of cable cores: one core (Single core), two cores (Double cores), three cores,

Four cores (Four Equal-section-area cores or three equal-section-area cores and one smaller section area neutral core),

Five cores (Five equal-area cores or three equal-section-area cores and two smaller section area neutral cores).

6. Standards: IEC 60502.IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST etc. Or other special characteristics as customers request. 

Application conditions

1. The long-time permissible operation temperature of conductor shall not be higher than 90^oC.

2. Conductor maximum short circuit (not more than 5 seconds) temperature shall not be higher than 250°C.

3. The power cable is not limited by drop in level when being laid, and the ambient temperature shall not be lower than 0°C.

If so, the cable should to be preheated.

4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame.