Price of anti abrasion suction box cover,Uhmw PE foil covers for paper or pulp machine

UHMWPE material has exceptionally low coefficient of friction offering superb sliding properties and is one of the best plastics for wear/abrasion resistance meanwhile tough and impact resistant even at cryogenic temperatures. As a result, it is definite that UHMW polyethylene is a wonderful engineering plastic that can solve many problems that other engineering plastics cannot.

      UHMW exhibits virtually no water absorption

      Non-Toxic

      Low coefficient of friction

      Corrosion resistant

      Abrasion and impact resistant

      Wear Resistant

      Dielectric

      Weatherproof

Excellent Abrasion-resistance

Good self-lubrication and low coefficient of friction

High anti-impact strength and good toughness

Good chemical corrosion resistance can resist almost all mediums such as acid,alcli and salt,but except

for concen trated sul-phuric-acid,concentrated nitric and a few organic solvents.

Inodorous,in noxious and impenetrable

Good conductibility and ultra-low water absorbability

Good anti-environmental stress breakage property which is 200 times of ordinary ethylene

Good cold resistance property which isnit brittle even if at 176°Cbeiow zero.

--Highest abrasion resistance of any polymer, 6 times more wear resistant than steel

--Anti-Weather & Anti-Aging

--Self-lubricating, Very low coefficient of friction

--Excellent chemical & corrosion resistant

--superior impact resistant, Noise- absorption, Vibration-absorption

--Temperature range: -2600C ~ +800C; Very high resistance to cold, doesn’t become fragile even

under -1800C

--High tensile Strength

--Non-Toxic and smell

--UV resistance

--Flame Retardant; relatively low in water absorption

--Excellent electrical properties

--Good performance in resisting environment stress crack, 200 times of ordinary PE

--No adhesion

--Light weight and easier to handle and fix

--Cost efficient; resulting in low energy consumption

--Does not rot, split or crack; 100% recyclable

--Great liner material for industrial material handling applications

--Easy Reprocessed

Textile machinery :

Picking device,Picking stick,Geers,Coupler,Bumper block,Shaft sleeve,Back bearer

Paper making machinery

Water suction tank cover,Pressure and seal parts,Joint,Sealed axle,Scraper,filter

Packing machinery

Guide rail,Slide block and dead plate of slider device,Star wheel,Screws,Conveyor

Ordinary machinery

Geers,Cam,Impeller,Roller,Pulley,Bearing,Bearing bush,Shaft sleeve,Pin roll,Gasket etc

Constructional/agriculture machinery

Sliding panel of reaper,lining board for plough,navvy and other mechanical parts

Chemical field

Liquor container like water tank,gasoline tank,pesticide 

Product Features

(1) abrasion highest plastic, seven times higher than carbon steel, four times higher than PTFE.
(2) Impact strength plastic in the first column, 2 times higher than that of polycarbonate, 5 times higher than ABS.
(3) self-lubricating performance equivalent to F4, add the oil than steel and brass after high lubricity.
(4) Corrosion resistance: at a certain temperature and humidity within the ability of various corrosive media, and the role of the organic solvent medium, high chemical stability.
(5) nonstick surface of product compared with other materials is not easy to attach, strong anti-adhesion properties.
(6) of impact resistance, impact energy absorbing the highest in all plastics, nylon 66 10 times 8 times PTFE.
(7) low temperature resistance, in liquid nitrogen (-196 °C), still malleable, this low-temperature toughness is all plastics that are not performance.
(8) completely non-toxic health: Is the U.S. Drug and Food (FDA) and the U.S. Department of Agriculture (USDA) approved for use in contact with food and drugs occasion of the material.

HDPE suction box cover High Density Polyethylene suction box cover:

HDPE is an engineering plastic that is often underestimated and althogh HDPE is popular,it is sometines confused with other engineering platics.HDPE is grade number the higher the density polyethylene and available in two main grades,300

and 500 grade.The higher the HDPE grade number the higher the density of the plastic is which improves the performance

of the product.

HDPE ofters resistance to almost all acids and bases,detergents and hot water.HDPE is an excellent engineering plastic that

has many unique and useful properties to offer users who need a varied and combinedrange of beneficial features

PE Applications:

(1) paper industry: the use of wear and lubrication, main products are vacuum box panel, dehydration plate, scraper, seals, bushings, and other paper cutter.  Thickness below 10mm UHMW-PE thin-walled tube can be used for belt conveyors and roller paper machine cladding tube.
(2) Food and beverage industry: the use of abrasion resistance, impact resistance, non-sticky, non-toxic health, production job board, conveyor screw, gear, etc., play easy to clean, long life, antifungal effect, but also for other parts of Health .
(3) Sewage: Sewage treatment plant sludge scraper, screw conveyor liners, mud impeller, shaft sleeve, grit collection system, clarifying device gear, sedimentation tanks lining and so on.
(4) electronics industry: semiconductor processing surface treatment and air pollution control systems, sewage control.  UHMW-PE is extremely excellent low temperature performance, at liquid helium temperature (-269 °C) remain under the ductility, it can be in refrigeration technology, cryogenic engineering to develop applications.  The latest UHMW-PE pipe can be replaced by a large number of fluorine plastic tube, widely used in the semiconductor industry domain.
(5) textile industry: is the use of impact resistance, wear resistance and smoothness, a variety of skin products, knot, gears, a buffer plate, bearing bushes, etc.
(6) sports, entertainment: skis lining, snow track automobile parts, gliders ground plate, ball apparatus parts, various bearing liner.
(7) Medical Devices: The human body implants, artificial joints, orthopedic surgical instruments and stents, surgical instruments spacers.
(8) chemical and other industries: electroplated parts, agricultural machinery, ship parts, ultra-low temperature nuclear machinery components.  Mainly using abrasion resistance, impact resistance, cold resistance, self lubrication, electrical characteristics. 

SizeAny size UHMWPE suction box covers we can supply as long as it within our below standard size :

 2000*1000*(10-30)mm;

 3000*1500*(10-30)mm;       

 4700*1200*(10-30)mm;                   

 4500*2000*(10-30)mm; 

 5000*1300*(10-30)mm;

We can give you an accurate size of with advanced machine.

Shandong Ningjin Xinxing Chemical Co.,Ltd. is one of the largest Engineering Plastic products manufacture in China.All 

the stuff in our company are dedicated to producing satisfying products and developing new products for our customer.

  We have gained many certificates from government and professional fields .We have a wide variety of products,mainly 

including all kinds of UHMWPE Fender Pad ,UHMWPE Sheet ,HDPE sheet,HDPE ice rink barrier, UHMWPE rod,

HDPE rod, PP sheet,PVC sheet and other Engineering plastic products.Our products are widely applied on electric fields ,

wharf and port ,mining ,chemical plant and so on which bring a lot of social benefits and economic benefits .

  In order to achieving rapid and sustainable development, we are willing to establish a wide and deep cooperation relation with enterprises both home and abroad.