Effective Smart Traffic Inductive Loop Vehicle Detection Sensor

Effective Smart Traffic Inductive Loop Vehicle Detection Sensor

Product Description

 1. wireless vehicle detector

 

Introduction:

WVD-130x wireless vehicle detector is designed for pursuit of high efficiency and low cost ITS traffic application systems. Based on technology of magnetic detection and uPower® wireless sensor network, WVD -130x vehicle speed sensors can be easily installed on road in few minutes without any wiring to acquire dynamic traffic flow information with no maintenance for many years.

 

 

KEY FEATURES

 

433MHz 120m transmit range

 

40Ah battery 10 years lifespan

 

Φ116/H90mm small size

 

-40~85℃ work temperature

 

Wireless OTA upgrade

 

97%+ accuracy

 

Embedded installation

 

 

Installation

1.Drill a small hole of Φ12/D10cm

2.Fill it with cement to 1/2

3.Embedded WVD to finish installation

4.Two WVD binding to detect the speed.

 

 

 

2.Wireless Access Point 

 

 

Introduction

 

WAP-348x wireless access point acts as a gateway between user applications and wireless vehicle detection network formed among  the WVD sensors installed on the road surface. WAP-348x manages the network and collects data from all the sensors, and on the other hand, provides data interface to user traffic systems.

 

KEY FEATURES

433MHz 120m transmit range

-40~85℃ work temperature

USB/RS-232/Ethernet data port

GPRS communication (Optional)

DC9-36V/PoE power supply

48 detection channels

48 OCs output terminals

48 detection result LEDs

L23/W10/H4.9cm

 

 

Technology Specification:

Detection	direcition,existance,flow,vehicle counting
power source	battery supply with 10 years lifespan
detecting technology	magnetic
accuracy	above98%
transmission	mesh network
calibration	self-adjustment
Update	OTA
wireless radio frequency	233MHz/2.4GHz
Size	Diameter116mm/Height90mm
Protection level	IP68

Traffic Project

 

1.  Adaptive traffic signal optimization

     Through the real-time vehicle presence data which is detected by WVD130x, the controller will controll the traffic red light and green light adaptively, save the waiting time for the drivers, make the intersaction traffic more smoothly.

 

Wireless vehicle sensor detect and transmit real-time data on all directions,  and Wireless Access Point get the data via antenna. The traffic controller systems get and analyse the traffic flow data, and calculate the best traffic scheme, controlling traffic lights release time.  On improving transportation effiency and saving drivers' time.

 

2. Traffic flow detection system

   Detector is installed in specified road, detect every vehicle pass by, and transmit the real-time information to traffic management systems  via wireless access points. The user systems can  calculate the traffic flows by analysing the data.

 

 

 

 

 

Major advantages:

a)  Install fast. It is only almost 6 minutes that is needed to install one wireless vehicle detector in the road, after installation, the traffic control could be released immediately;

b)  Work all-weather. Bad weather for example heavy fog, snow and rain makes no difference;

c)   No damage to the road. There’s no need to cut slots on the road surface and place cables or wires as the installation of loops, but only a tiny hole with the size Φ 120/H 100 mm, which makes WVDs become the most suitable vehicle detecting solution on the city high-way and bridges;

d)   About 10 years long life span. With high standard water proof and anti-press characteristics,  WVD wireless vehicle detector can even be used in the damaged or distorted roads where loops cannot be installed.

e)  Cost saving. You just can use the cement which is about $2 for 3-4 sensors.

f)   Easy to maintain. Unlike the loops that are easily to be damaged but difficultly to be repaired, WVD wireless vehicle detector supports firmware updating over the air. No need to re-cut the slots, no more materials needed, and all of what you need is to take almost 10 minutes for the devices wireless updating;

g)  Low operation consuming. Due to the ultra-low power design and battery supply solution, WVD wireless vehicle detector’s consumed power is very lower than any other detectors like loops, video, micro-wave etc. in the market. This appears more and more significantly to our environments;

h)  Replace loops seamlessly. The same installation position and compatible output signals makes it easily and simply to replace loops in your system directly.

We supply one year quality gurantee time and 24hours on line service.

  Effective Smart Traffic Inductive Loop Vehicle Detection Sensor