Plastic Machine PVC Cabinet Board Extruder Extruding Line

Specifications

PVC Cabinet Board Profile Making Machine

WPC Profile Line/ WPC Flooring/ Decking profile Machine:

It is a new production line developed by our engineer, which is use PVC and wood-powder as raw material with a little other additives to produce WPC board as ceiling indoor decoration.

We adopt abroad advanced technique and the news craftwork. It is main used for wood-plastic floor production line. The thickness of floor: 5-15mm, width: 100-300mm.

Multi matching parts of this line are used name brand product in the world. Combining our many years' experience, we make this line more reliable and perfect.

The floor which produced by this line, has may advantages. Such as smooth and clean suface, anti-corrupt, fire-proof, water-proof, high insulation and so on.

Description of wood plastic composite WPC machine

1, Material of WPC production line:

With special designed screw, barrel. Moule and producing process, this line can produce PE PP PVC and wood powder profile.

2, Application of WPC products:

This is a new kind of environmental freindly building material. The products can be used for pallets, packing plates, windows and door frames, decoration panels and etc.

Description of WPC products:

1, New product: The wood-plastic is a new kind of synthetic material through the process of mixing, exruding, calibrating, hualing off and cutting,

2, Material: Uses PVC, PP, PE resin or recycled plastic and plant fibre ( wood powder, chaff, straw etc. ) as raw material.

3, Advantages: This kind of wood-plastic are not only very similar with natural wood in appearance and feel, but also have the same characteristics as wood of excisable, planeable, sawable, unmatched grip, low bibulous rate, good moisture resistance, mothproof, mildew resistance, good resistance to acid and alkali, anti-corrosion, and it has the feature of fire resistance.

The products are non-toxic, non-polluting, environment-friendly and save-energied, without formaldehyde, benzene and ammonia and other harmful substances.

4, Application: The wood-plastic products are widely used in outdoor floor, close to water construction, balcony, landscape architecture, chairs and benches, fences, interior doors and windows, furniture, etc.

Main parameter: 

Item Description Unit SJSZ51/105

1 Output Capacity Kg/h Max. 150

2 Number of the Screws 2

3 Diameter of the Screw mm 51/105

4 Rotating Direction of the Screws Forth & Reverse

5 Rotation Speed of the Screw r/min 1-34.7

6 Available Working Length of the Screws mm 1430

7 Main Motor Power Kw 18.5

8 Speed Adjusting Mode frequency conversion adjustable, ABB Inverter

9 Gear reducer Rigid-gear surface low noise design

10 Heating Capacity of the Screw barrel Kw 16( casting-aluminium electric-thermal elements )

11 Material of the Screws and the barrel 38CrMoA1

12 Nitriding Depth of the Screws and the barrel mm 0.5~0.7

13 Nitriding rigidity of the Screws and the barrel HRC 50~55

14 Cooling Mode of the Screw barrel by air cooling

15 Temperature Adjustment of the Screws By Screw-core Temperature Adjusting Device

16 Indicators Melt pressure & temperature indication by gauge

17 Temperature controller Brand: Omron, Japan

18 Element of Electric System ( contactors, buttons, switches ) Brand: Schneider

19 Power of the Vacuum Pump Kw 1.5

20 Max. Vacuum Degree MPA -0.093

21 Cooling Water Consumption L/min 1~3

22 Plastic Material Feeding Mode By Fixed-quantity Screw

Feeding Device

23 Rotation Speed of the Feeding Screw R/min 3.5~47 ( frequency conversion )

24 Height of the Screw Axes mm 1000

25 Figure Dimensions ( L× W× H ) mm 3300× 1450× 2100

26 Weight Kg 4000

A. 2.4.3 Vacuum calibration table type QDY-210

Item Description Unit 

1 Length of the table mm 4000

2 Material of the tank stainless steel

3 power of vacuum pump and quantity Kw 5.5*3, 4*1

4 Water pump power Kw 1.5*1, 0.75*1

5 max vacuum degree MPA 0.02-0.09

6 valid length of holding mold mm 5900

7 vacuum interface and water pip interface PCS 32 /32

8 max vacuum exhausting m3/h 180

9 Up-down Adjusting Range mm ± 40

10 Left-right Adjusting Range mm ± 40

11 Axes line height mm 1000

A. 2.4.4. Hauling-off Machine type 

Item Description Unit 

1 Hauling Motor Power Kw 4

2 max hauling Force N 30000

3 Hauling moving Speed m/min Up to 0.3-4.5 m/min

4 pedrail width and valid length mm 240/2800

5 pedrail clamping unit adopt pneumatic clamping

6 reducer amount and power 2 sets/1.5kw

7 Speed adjustment Frequency Conversion ABB Inverter

8 Axes Height mm 1000

9 Element of Electric System From Seimens, Suzhou

A. 2.4.5 Cutting machine type 

Item Description Unit 

1 Saw diameter mm Φ 400

2 Cutting motor power KW 1.1

3 cutting direction from down to up

4 Rotation speed Rev/min 2840

5 cutting time and moving length 1-5sec/hypo; 0-500mm

6 Material of Cutting Saw Alloy steel

7 Clamping Mode Pneumatically Drive

8 dust absorption unit blower: 1.5kw, round bag style

9 Cutting Control Pre-set length, Automatically Cutting, or manual operation

10 Electric elements Brand: Siemens

A. 2.4.6 Stacker type 

Item Description Unit 

1 Working Mode Pneumatically drive

2 drive of discharging frame pneumatic; 63× 100 cylinder-2 sets

3 material of panel 1Cr18Ni9Ti Stainless Steel

4 Working length mm 6000

5 Axes Height mm 1000

6 Material of the tilting plate Stainless Steel

7 Figure Dimension Mm 6000× 700× 1250

8 Weight Kg 450

Main machine parameter: