Utp/ftp/sftp Cat5e/cat6 Lan Cable Network Cable

Spec: 4Px24AWG BC Conductor+0.91mm PE Insulation+5.2mm inner PVC Jacket + PVC/PE outer PVC

Descriptions:
1) Rated temperature: 60°C, 75°C
2) Bare solid of stranded copper conductor
3) Color coated PE insulation
4) Rip cord (optional)
5) PVC or LSZH jacket
6) Flammability grade: CMX, CM.CMR
7) Pull out box packing available 
 

Conductor:

Material:Bare copper

Number of pairs:4pairs

AWG:24awg

Conductor diameter:0.515±0.003mm

Insulation:

Material:HDPE and FRPE

Diameter:1.02±0.005mm

Average thickness:0.212mm

Minimum point thikness:0.2095mm

First screen:aluminum mylar shield(superposition rate:25%)

Overall screen:80/0.1mm TC braid shied(coverage:60%)

Braiding shield(48/64/96/112x0.12mm or 0.15mm or 0.16mm,braid material,AL-MG,CCA,CCS,copper or tinned copper for braid),FR/PVC or LSOH jacket

Jacket rip cord:optional

Sheath:

Material:PVC or LSOH

Nominal diameter:6.0±0.2mm

Average thickness:0.50mm

Operating temperature:-20 to 75°C

Minimum bend radius (install):(8*OD)

Flame test:CMX,CM,and IEC60332-1

Reference standard:TIA/EIA568B and IEC/ISO11801

 1. What kinds of products does SANHE CABLE manufacture?
1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on;
2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on;
3)PVC Insulated (Flexible ) Wire ;
4) PVC Insulated and Sheathed (Armoured) Power Cable;
5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;
6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on.

2.Which markets do you involve mainly in?
Our products have been exported mainly to Australia, Russia, Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Austrapa, etc.

3. Which standards do you comply with when you produce the electrical wires and cables ?
We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer provided.

4. What is the min.order quantity ?
It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted .But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow,we will try our best to solve the problem and meet with the requirement If you have special request.

5. What is the production capacity per week or per month ?
For the bare conductor, we can finish 3000 tons within one month. For power cables, that depends on the type and size. The total output value per month is approx. USD3,000,000.00 for insulated aluminum cables and that is approx. USD8,000,000.00 for insulated copper cables.