Skylite frp panel, frp corrugated panel, translucent panel, fiberglass roof panel, roof skylight panel

Specifications

We are specialied in making Skylite frp panel, we can design all kinds of pattern.

Detailed Product Description: Skylite frp panel

Mechanics Features: High steel and high tenacity FRP.
Resin Ingredient: Advanced anti-ageing DTM-1071 resin
Fiber Intensity: Non-alkali, non-twist, non-glue glass fiber.
Surface Treatment: Pasting import PT055film duplicately .
Reinforced Bending Line: Having anti-pull reinforced with longitudinal uniform distribution (It depends on consumers to choose voluntarily whether adding) 
Glass Fiber: Adopting Taian high- quality glass fiber, the content no less than 30%.
Unit Weight: 1800g/m² 2400g/m² 3050g/m²
Nominal Thickness: 1.2mm 1.5mm 2.0mm
Heat Resistance Limit: -60 to +130
Light Transmittance: 75%±2% ( light green) 53%±2% (cream white)
Anti- ultraviolet Rate: 99%
Tensile Strength: 95MPa
Flexural Strength: 165Mpa
Cracking Elongation Rate: 1.9% 
Pasteur Hardness: ≥ 50
Thermal Expansion Coefficient: 2.3×10¯5 cm/cm/
Thermal Conductivity:0.18w/m°k
Warranty: 15 years 

The Technical Standards of High-qualituy FRP.
1.Good tenacity. No cracking phenomenon when driving nails in roof installation
2.Having close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP is consistent with steel plate.
3.Transmittance loss rate is low. No yellowing phenomenon after long term service.
4.Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold.
5.Light through FRP assumes scattering shape and gentle.
6.Bright and clean appearance, no distinct air bubble and cracking on FRP.
7.Anti- ultraviolet and anti- chemistry corrosion.
8.Anti- ageing and anti- pulverization.
9.Long service life.