Fleck 9500 Valve

Specifications

Fleck 9500 Valve

1.5" Twin Tank Commercial Control Valve

Features:

(1) Easily-adjustable, 5-cycle, downflow-brining control

(2) Rugged, long-life construction features a lead-free brass valve body

(3) Uses conditioned water for regeneration

(4) TESTED AND CERTIFIED By the WQA To NSF/ANSI SDT. 61 Section 8 Material Safety Only and ANNEX "G"

Options :

(1)Hot Water(150 ° F )

(2)Electronic Timer ,SE or XT

WATER PRESSURE: A minimum of 25 pounds of water pressure is required for the valve to operate effectively.

ELECTRICAL FACILITIES: A continuous 110 volt, 60 Hertz current supply is required. Make certain the current supply is always hot and cannot be turned off with another switch.

EXISTING PLUMBING: Condition of existing plumbing should be free from lime and iron buildup. Piping that is built up heavily with lime and/or iron should be replaced. If piping is clogged with iron, a separate iron filter unit should be installed ahead of the water softener.

LOCATION OF SOFTENER AND DRAIN: The softener should be located close to a drain.

BY-PASS VALVES: Always provide for the installation of a by-pass valve.

CAUTION: Water pressure is not to exceed 125 p.s.i., water temperature is not to exceed 110° F, and the unit cannot be subjected to freezing conditions.

All the equipments is high quality components designation and 100% factory tested before shipment. 1-Year Manufacturer's warranty Years of trouble free service offered. So any problem,  please do not hesitate to contact me, and I will help you to solve your problem within 24 hours.

Withhighly-quality purified water treatment plant and accessories,the quality is absolutely guaranteed. By the way, we always offer spare accessories that easy loss by free. So you can choose our equipments or accessories with zero worry.

Best quality+ Thoughtful service=100% trust