Impact COMBUSTION TESTING EQUIPMENT

Burner

Inner diameterΦ9.5mm ± 0.3mm; single gas bunsen burner 1pcs (inner diameter Φ12mm ± 0.3mm); mix gas bunsen burner 1pcs.

Test Dip Angle

20°, 45°, 90°

Flame Height

20mm ± 2mm ~ 175mm±1mm be adjustable

Fire Flame Time

0-999.9s±0.1s be adjustable

Residual Flame Time

0-999.9s±0.1s, automatic recording, manual operation pause

Exhaust Heat Time

0-999.9s±0.1s, automatic recording, manual operation pause

Burning Gas

98% methane or 98% propane (can instead of liquefied petroleum gas in general conditions)

Flow Pressure

Double-case meter and pressure gage (fuel gas & atmosphere)

Temperature Test Range

0~1000℃

Flame Temperature Requirement

From 100℃±5℃ to 700℃±3℃ within 44±2s ~ 54±2s

Temperature Thermocouple

Φ0.5mm importshield (K type) thermocouple 2pcs; Double-temperature measurement system,V-0/1/2 (50W) or 5VA/B (500W)

Test Background

Black

Test Process

Manual control test procedure, single air draft

Reference Standard

UL 94-2006, IEC 60695-11-3, IEC 60695-11-4, GB/T5169.15, 16, 17, 22-2008

Work Room Space

0.5 cube, stainless steel crate (can customize other sizes)

External Dimension

W 1100mm×D 700mm×H 1300mm

Test samples of inflammable, explosive material, easy to volatile material are forbidden;

Storage corrosive substances test sample is forbidden;

Storage biological test is forbidden;

Storage strong electromagnetic emission source for test sample or storage are forbidden;

GB/T4797-2006 / IEC 60721-2-4:2002 electrician electronic product solar radiation and temperature under the condition of natural environment

GB/T3511-2008/ISO 4665:1998 Vulcanized rubber or thermoplastic rubber weather resistance

B/T 2423.24/1995 / IEC68-2-5:1975 Electronic Electrician Product Environmental Test

GB-T5170.18-2005 Electronic Electrician Product Environmental Test Equipment basic parameter calibration method temperature / humidity combination cyclic test equipment.