cincinnati accelerated weathering tester

Application Standard & Technical Specification

Ozone Aging Test Chamber. SM-150L-CY.

Volume and Dimension

150L

Internal Testing Room

W500×H600×D500 mm is the internal testing space size;

Outer Fully Dimension

W1350×H1550×D950mm is the outer fully machine size

Ozone Concentration:

0~2000 pphm(direct reading setting)

Concentration Deviation:

10%

Test Bin Temperature:

Indoor temperature measurement Range~+80℃

Temperature Uniformity:

±2℃

Relative Humidity:

Measurement range above 60%

Specimen Holder rotating speed:

0~50mm/s

Dynamic Condition Pull-up Frequency:

0.5Hz

New Type Specimen Holder:

Each fixture can install test article, stretch can meet I-shaped dumbbell panel and actual artifacts

Test Gas Flow:

0-80L/min

01

Motor driver specimen holder installation: meet static method extension test, specimen orbit can meet principle of cycloid trajectory.

02

Auto ozone concentration digital controller.

03

Double beam “QUA” non-deviation UV ozone tester.

04

Auto digital online measurement.

05

Keep the metrological verification adjustion interface.

06

Auto-tuning ozone concentration/ humiture data setting controller PID for easy operation.

01

High grade wear-resisting paint coating shell & SUS304 liner.

02

AI digital smart procedure control accommodometer.

03

Gas flowmeter control the all levels of gas flow accurately, match “QUA” non-deviation UV ozone tester

04

Bill-Lambert law measurement application software (internationally recognized).

05

Be loaded with gas purifier, thermostatic bath, active carbon assimilation and silicone tower drier.

06

The ozone air parallel to the sample.

07

Optional far-end monitoring software (print the test data by PC).

08

Prepared the classic chemical test with ozone concentration interface.

09

Set the voltage-stabilized source in test chamber.

01

High grade wear-resisting paint coating shell & SUS304 liner.

02

AI digital smart procedure control accommodometer.

03

Gas flowmeter control the all levels of gas flow accurately, match “QUA” non-deviation UV ozone tester

04

Bill-Lambert law measurement application software (internationally recognized).

05

Be loaded with gas purifier, thermostatic bath, active carbon assimilation and silicone tower drier.

06

The ozone air parallel to the sample.

07

Optional far-end monitoring software (print the test data by PC).

08

Prepared the classic chemical test with ozone concentration interface.

09

Set the voltage-stabilized source in test chamber.

Temperature Range

25℃~80℃

Moderation Range

50%~95%R•H

Ozone Concentration

0~2000pphm

Temperature Fluctuation

±0.5℃

Ozone control Precision

±10%

Frame Rotate Speed

360°rotation (1 circle/minute)

Controller 

Color LCD touch screen

Unit of Time

H.M.S.the Max is 9999H

Ozone Concentration Analysis

Import concentration analysis apparatus, 4~20mA output

Ozonator

High pressure voiceless discharge tube

Acquisition System

Siemens PLC modules

Humidity System

Outer isolation type, stainless steel boiler surface evaporative humidifier

Dehumidification System

Adopt evaporator coil to dehumidify

Water Supply System

Automatic control water supply, and recycle residual water for reduce consumption

Heating System

Independent system, nichrome electrical Heater

Ozone Concentration

England ozone concentration sensor with standard signal output and sampling

Ozonator

Voiceless discharge tube type ozonator