Compression Heat Air Dryer 60cubic meters per min

Specifications

High efficiency,energy-saving
High performance of the activated alumina
Unique pipeline design
ISO9001:2008 & CE

Compression Heat Purge Desiccant Air Dryer 

How it works?

 The compression heat series dryer using the high heat,high un-saturation air from air compressor to heat the desiccant,it saves not only the power consumption,but also the air consumption compared to the heated purge dryer.The original compressed air goes to the water cooling system after heating,and then enters into the tower to absorb to dried air. We use 1.5% of finished air to purge the heated desiccant,switching between two towers.

Characteristics:

1.High efficiency,energy-saving

2.Pressure dew point:-20~-40°C

3.Purge air≤1.5%

4.Reliable valve to ensure the completion of all the procedures,pro-long the lives of other parts

5.High performance of the activated alumina,it is equality,intensity,good dew point and less dus to emerge,long using life.

6.Unique pipeline design,it’s ensuring the equal distribution of purge air.

7.Three stages draining system

8.Low pressure loss

Work Condition and Technical Data:

Inlet temperature : 110~150°C

Inlet pressure: 0.6-1.0MPa

Purge air:≤1.5%

Pressure loss: ≤3%

Inlet oil content:≤0.01ppm

Dew point: -40°C~-60°C

Cooling water inlet temperature: ≤32°C

Cooling water inlet pressure:0.2-0.4MPa

Working method: continuing alternative working beween two towers

Control method:PLC

Purge type:compression heat purge

Working periods:T=4~8h

Installation mode:indoor,non-basement

HSD-60YR Technical Data:

Model:HSD-60YR

Capacity(Nm³/min):60

Weight  (kg) :3250

Power consumption:200

Flange connection:DN125

Desiccant weight(kg):1440

Cooling water circulation (Nm³/h):23

Dimensions(mm) : 3000*2000*2900(L*W*H)

Thanks for your kind Support & Cooperation!