Hot Sell!! Kafuter K-300 Self Adhesive Vinyl Tiles

Specifications

      Hot sell!! Kafuter K-300 Self Adhesive Vinyl Tiles                                           

  ( For glass/crystal bonding)

 Characteristics:

UV light curing adhesive is one-part, modified acrylic adhesive which can exposed to  UV  light or visible light

Features: high transparency and bonding strength, low odor and viscosity, good deaeration, suitable for big area glass or crystal bonding

Application:  Using in big area glass or crystal bonding. Like bonding in glass doors, glass artifacts, crystal artifacts, etc.

Typical Properties:

User's guide: 

Kafuter uv light adhesive is recommended for big area glass or crystal bonding .uv adhesive K-300 can be cured by exposure to UV/Visible light of sufficent intensity. surface cure is enhanced by exposure to uv light in the 200 to 260 nm range. cure rate and ultimate depth of cure depend on light intensity,spectral distribution of the light source, exposure time and light transmittane of the substrate through which the light must pass.

Notes: 

1.This product is light sensitive, exposure to daylight, UV light and artifical lighting should be kept to a minimun during storage and handling.

2.For best peformance bond surfaces should be clean and free from grease.

3. cure rate is dependent on lamp intensity, distance from light source, depth of cure needed or bondline gap and light transmittance of the substrates through which tha radiation must pass.

Packing Specifications: