Kafuter 10ml K-302 metal uv glue acrylic glass glue 10ml shot glass

Specifications

         Kafuter 10ml K-302 metal uv glue acrylic glass glue 10ml shot glass

                                                      ( For glass to metal/glass to glass bonding)

Characteristics:

UV light curing adhesive is one-part, high intensity, uv curing modified acrylic adhesive. general purpose, good storage abilitiy, and have great adhesion to glass, crystal, and many other metals. Especially for small area of metal to glass, and glass to glass bonding.

Application:  Using in glass with metals bonding, this glue can bond between glass, crystal, and metals like aluminum, carbon steel, stainless steel, and galvanized sheet steel, etc.

Typical Properties:

User's guide: 

Kafuter uv light adhesive is recommended for big area glass or crystal bonding .uv adhesive K-302 can be cured by exposure to UV/Visible light of sufficent intensity. surface cure is enhanced by exposure to uv light in the 200 to 260 nm range. cure rate and ultimate depth of cure depend on light intensity,spectral distribution of the light source, exposure time and light transmittane of the substrate through which the light must pass.

Notes: 

1.This product is light sensitive, exposure to daylight, UV light and artifical lighting should be kept to a minimun during storage and handling.

2.For best peformance bond surfaces should be clean and free from grease.

3. cure rate is dependent on lamp intensity, distance from light source, depth of cure needed or bondline gap and light transmittance of the substrates through which tha radiation must pass.

Packing Specifications:

Shipping ways: can be shipped or carried by air, by truck, by ship, etc